• Dust-Cover-1.png

1 / 2

Zoom In

  • Dust-Cover-1.png

0

Upholstery Supplies

Dust Cover

From $3.75

A durable black cloth 110cm wide for covering the bottom of furniture. This width is ideal for all chairs, Sofa's and Dining Chair's. Upholstery grade thickness and quality. Cover the bottom of lounges to hide the frame or electrical parts and even to stop dust and unwanted pests from getting into the base of furniture Sold either by the meter or in handy 5 or 10 meter lengths Buy in bulk and save up to $0.75 per meter 'You Can Do It' yourself and save read more

Clear

SKU:
7007/1
Weight
80 g
Dimensions
260 × 190 × 30 mm
Quantity

1 Meter, 5 Meter, 10 Meter

Description

A strong durable black coloured  replacement material used to cover the base of furniture.

Also known as Dust cover, Bottom Cloth or Spun bonded Nonwoven lining

Suitable for use on interior or exterior furniture

110cm wide, wide enough to fit all sofa’s, chairs and Recliners bottoms
70 gsm thick, will not tear or go brittle and is non transparent

Sold either by the metre or in handy 5 or 10 meter length packs

Fast nationwide $5.00 flat rate shipping from our Australian warehouse

A strong durable black coloured  replacement material used to cover the base of furniture.

Also known as Dust cover, Bottom Cloth or Spun bonded lining

Suitable for use on interior or exterior furniture

110cm wide, wide enough to fit all sofa’s, chairs and Recliners bottoms
70 gsm thick, will not tear or go brittle and is non transparent

Sold either by the metre or in handy 5 or 10 meter length packs

Fast nationwide $5.00 flat rate shipping from our Australian warehouse

Additional information

Weight
80 g
Dimensions
260 × 190 × 30 mm
Quantity

1 Meter, 5 Meter, 10 Meter

How To

How To

How To Change A Dining Chair Dust Cover

  1. Carefully turn over the dining chair and use a sheet to protect the frame and remember to practice safe lifting techniques
  2. Unscrew and remove the seat pad base from the dining chair frame if required
  3. Note the direction of the front of the seat pad with a pen
  4. Using a pair of pliers remove all staples
  5. Discard original dust cover
  6. Lay the new Sofa Rehab’s dust cover over the seat base and trim cover to slightly wider than base
  7. Fold the dust cover in half and snip the centre point
  8. Locate the front edge of the seat pad where it’s been marked and lay the dust cover down with the cut out at the front centre
  9. Place the first staple at front centre and then one staple to left and right front corners
  10. Repeat process for rear and side edges folding over the edges straight and pull the cover tight
  11. Fill in the gaps with staples spacing a thumbs width apart is ideal
  12. Reattach the seat pad base to the dining chair frame
  13. Turn over the dining chair, using safe lifting techniques
  14. Test the chair

How To Replace A Sofa ,  Chair Or Recliner Dust Cover

  1. Carefully move the furniture into space, use a sheet to protect the floor turn over the furniture remember to use safe lifting practices
  2. Unscrew and remove the legs, feet or attachments from the base if required
  3. Using a pair of pliers remove all staples
  4. Discard original dust cover
  5. Lay the new Sofa Rehab’s dust cover over the seat base and trim cover to slightly wider than base, two finger wide is perfect
  6. Fold the dust cover in half and snip the centre point
  7. Locate the rear edge of the furniture and lay the dust cover down with the cut out at the rear centre
  8. Place the first staple at rear centre and then one or two staples to left and right rear corners
  9. Repeat process for front and side edges folding over the edges straight and tight
  10. Fill in the gaps with staples spacing a thumbs width apart
  11. Reattach the legs,feet and attachments to the furniture base
  12. Turn over the furniture again using safe lifting techniques
  13. Test the furniture

Tools Required

Tools Required

What You’ll Need To Easily Replace A Dust Cover

  1. Sofa Rehab Dust Cover
  2. Scissors
  3. Stapler
  4. Spare staples
  5. Pliers
  6. Staple Lifter ( Flat head screwdriver is ideal)
  7. Pen
  8. Allen Key or screwdriver

Reviews (0)

Be the first to review “Dust Cover”

  • There are no reviews yet.