Electric Recliner Spare Parts, Mechanism, Moving Blocks and Clevis
Universal Recliner Drive Link Brackets
$45.00
In stock
Replace bent or worn drive‑link brackets and restore smooth, even motion to your electric recliner. This pair of Leggett & Platt heavy‑duty metal brackets secures the centre drive rod shaft to the white actuator slide block, returning full strength and alignment without buying a whole new mechanism. Engineered for universal square rods. Heavy‑Duty Metal Drive Toggle – Universal Replacement. Engineered as a universal replacement bracket, it suits mainstream recliner actions that share the square rod profile—Bolt it in at both ends, then sit back and enjoy the smooth recline. Need a Different Bracket or More Spare Parts? Browse our full range of mechanisms (click here), or contact us for expert help picking the right component for your recliner project. read more
In stock
Description
Metal Drive‑Link Bracket for Leggett & Platt, RMT & Universal Recliner Mechanisms
This solid‑steel drive‑link (toggle) bracket is the small but critical joint that clamps onto your recliner’s square centre drive rod and bolts to the white slide block, transferring every bit of motor force to the foot‑rest mechanism. Swap it in when the factory bracket cracks or bends—no need to buy a whole new mechanism or actuator. Fits either side of the actuator block and suits most Leggett & Platt, RMT and generic electric recliner frames.
Compatible with Standard Drive Shafts
Before ordering, confirm your drive‑rod is minimum 8 mm (5⁄16″) square profile and that the original bracket’s pivot pin is 8–10 mm from the rod face. Need help? Contact our support team for expert advice. We’re here to make sure you get the right part the first time.
Trade‑Grade Steel Drive‑Link Bracket — OEM‑Spec Replacement for Leggett & Platt / RMT Mechanisms
Sofa Rehab carries the OEM and universal recliner parts pros struggle to source—from Leggett & Platt and RMT drive‑link hardware to actuator leads, switch packs and bulk leather repair products. Our ex‑field technicians provide instant cross‑reference help, while downloadable measuring guides and teardown videos ensure your techs arrive with the right gear and leave with the job done—backed by same‑day dispatch from our Brisbane warehouse.
Save Time & Money and Do it Yourself!
With our wide range of repair products, our easy step-by-step instructions and video tutorials, you’ve got everything you need to repair it yourself. Feel great about having done the repair yourself and saved $$$ on the repair.
Technical Specifications
Technical Specifications
Make –Leggett & Platt
Sides –Left and Right (1 x pair)
Material –Metal
Colour –Black
How To
How To
Always follow safe lifting techniques.
1, Isolate the Chair
Unplug the transformer from the wall, then press each switch button once to discharge any residual power.
2, Expose the Mechanism
Tip the recliner forward onto its arms and headrest, so the base frame is fully visible.
3, Identify the Broken Bracket
Locate the white nylon slide block on the actuator rail. Remove the 4 or 6 bolts used to fasten the brackets to the white block. The drive‑link bracket clamps omto the square centre rod with 4 self tapping bolts, remove these 4 bolts also.
4,Release the Old Bracket
The factory bracket simply slides off the square rod and block.
5, Fit the New Brackets
Fit your Sofa Rehab metal universal Recliner actuaotr Drive Links on to the white block and drive shaft ensuring the left and right sides are correctly positioned. Install the bolts to fasten in place.
6,Functional Test
Sit the chair upright, reconnect power and run a full open/close cycle. Look for smooth, synchronous movement on both sides. If anything binds, power off and re‑check alignment.
7,Final Tightness Check
After two full cycles, re‑inspect the bracket and bolts. Everything snug? Job done—enjoy the savings
What's in The Box?
What's in The Box?
1 x Left side Actuator Drive Link
1 x Right side Actuator Drive Link
**Note no bolt, screws and nuts supplied with these brackets.
Reviews (0)
Thank you for making an effort to leave a reivew but to protect against spam we only accept reviews from verified owners. Please proceed to login using the same email address you used when ordering the product.
Customer Login
- There are no reviews yet.
FAQs
FAQs
Do I need any special tools to install it?
No. A Phillips screwdriver (or 10 mm socket, depending on your bolts) Most customers finish the swap in under ten minutes.
Is the bracket handed—left and right?
Yes, they are left and right handed sets. You will recieve one of each.
Can I install these myself, or do I need a technician?
These parts can be installed at home using basic tools. If you're confident with DIY repairs, it's a straightforward job. We also provide guidance if needed.
My actuator still works but the chair won’t move—will this part solve it?
If the motor runs yet the foot‑rest stays put or moves unevenly, a fractured drive‑link bracket is the usual culprit. Replacing the bracket re‑links the actuator to the mechanism and restores normal operation without the cost of a new motor.
Should I replace both the left and right arms or just one?
We strongly recommend replacing both arms at the same time to ensure balanced movement and even wear. They are sold as a matched pair.
