Okin Refined JLDQ.18.134.333D05 Recliner Motor
$198.00
In stock
Replacement Okin Refined JLDQ.18.134.333D05 linear actuator motor for electric recliners. This genuine spare part has a 515mm installation length and 333mm stroke. Includes 1x 5-pin female lead (370mm) and 1x 2-pin male power plug with clasp (600mm). Okin Refined JLDQ.18 Recliner Actuator Motor. Designed specifically for use in electric recliners and sofas, this actuator delivers smooth and reliable operation. Easy to replace with matching specifications, and backed by Sofa Rehab’s expert DIY support team. Looking for Another Model or Stroke Size? We stock an extensive catalogue of genuine and universal replacement actuators (click here) to suit all popular recliner chair brands and models. If you’re unsure which motor you need, feel free to contact us for assistance. read more
In stock
- Description
- Technical Specifications
- How To
- Reviews (0)
- FAQs
- Add a review
Description
Okin Refined JLDQ.18 Recliner Actuator Motor – 333mm Stroke
This genuine Okin Refined JLDQ.18.134.333D05 actuator is designed to replace broken or worn motors in electric recliner chairs and sofas. It has a 515mm installation length (measured centre-to-centre between mounting holes), a 333mm stroke, and a “134” block-to-mount dimension. Both cables exit from the motor end housing for straightforward fitment.
With a smooth and reliable operation, this actuator ensures your recliner returns to full working condition. This model is not suitable for lift chairs.
Check Measurements Before Ordering
For accurate fitment, please measure the installation length of your existing actuator and confirm the stroke size. The JLDQ.18 range has different variations, and compatibility depends on exact dimensions and plug type. If you’re unsure, contact us for guidance before placing your order.
Plug Types and Cable Details
This motor comes with: – 1x 5-pin female plug on a 370mm lead. – 1x 2-pin male power plug with clasp on a 600mm lead.
Both leads exit from the opposite end of the housing for easy connection. Please compare these plug types with your existing actuator to confirm suitability.
Guaranteed Genuine Okin Refined Parts
Okin Refined actuators are widely used in recliner chairs by leading furniture manufacturers. Buying genuine parts means you can be assured of the same plug style, mounting dimensions, and performance as the original unit supplied with your recliner.
DIY Friendly Replacement – Save Time and Money
Replacing a recliner actuator is a straightforward DIY task that requires only basic tools like a screwdriver. With Sofa Rehab’s step-by-step guides and video tutorials, you’ll be able to swap out your faulty motor quickly, restore your recliner to full function, and save on costly repair call-outs.
Technical Specifications
Technical Specifications
Technical Specifications
| Model | Okin Refined JLDQ.18.134.333D05 |
| Application | Electric recliner chairs and sofas (not suitable for lift chairs) |
| Installation Length | 515mm (centre-to-centre between mounting bolt holes) |
| Stroke Length | 333mm |
| Block-to-Mount Distance | 134mm |
| Power Input | 2-pin male plug with clasp, 600mm cable |
| Hand Control Connection | 5-pin female plug, 370mm cable |
| Cable Exit Position | Both leads exit from the motor housing end |
| Manufacturer | Okin Refined Electric Technology (DewertOkin) |
How To
How To
How To Install the Okin Refined JLDQ.18.134.333D05 Actuator
Follow these simple steps to safely replace your recliner actuator motor. No prior experience is required, just basic tools like a screwdriver or wrench. Always take care when moving heavy furniture and follow safe lifting techniques.
- Unplug the power supply. Disconnect your recliner from the wall socket before starting to ensure your safety.
- Move the chair to an open workspace. Place it on its side or back so you can access the underside easily. Use safe lifting techniques to avoid injury, and ask for assistance if needed.
- Take a reference photo. Before removing anything, use your phone to take a clear picture of how the actuator and cables are installed. This will make reassembly easier.
- Disconnect the cables. Unplug the 2-pin power cable and the 5-pin control plug. Note where each one is connected.
- Remove the mounting bolts. Use a screwdriver or socket wrench to undo all the bolts at each end of the actuator and from the white block. Keep the bolts safe for reuse.
- Remove the old actuator. Carefully slide the faulty actuator out of position, following safe lifting practices.
- Install the new actuator. Position the new JLDQ.18 actuator in the same place as the old one. Line up the mounting holes and re-fit the bolts securely.
- Reconnect the cables. Plug the 2-pin power cable and the 5-pin control lead into the matching sockets, making sure the plugs are fully seated.
- Test the recliner. Plug the recliner back into the wall socket and test the operation of the new actuator. Check for smooth movement and that everything works correctly.
- Final check. Ensure all bolts are tightened, cables are secured away from moving parts, and the recliner is stable before use.
Reviews (0)
Thank you for making an effort to leave a reivew but to protect against spam we only accept reviews from verified owners. Please proceed to login using the same email address you used when ordering the product.
Customer Login
- There are no reviews yet.
FAQs
FAQs
How do I confirm this is the right actuator for my recliner?
Firstly check the Model number it should read JLDQ.18.134.333D05. Second measure the installation length between the mounting bolt holes (should be 515mm), check the stroke length (333mm), and confirm the plug types match your existing actuator.
Is this actuator suitable for lift chairs?
No, this model is designed for electric recliner chairs and sofas only. It is not suitable for lift chairs.
What tools are required for installation?
You only need a basic screwdriver or socket wrench. Remember to take a photo of the existing setup before removing the old actuator, and always use safe lifting techniques when moving your chair.
Do I need professional help to install it?
No, this actuator is DIY-friendly. With our step-by-step instructions and video tutorials, most people can complete the replacement in under 30 minutes without prior experience.
What comes in the box?
The package includes a genuine Okin Refined JLDQ.18.134.333D05 actuator with a 5-pin female control cable (370mm) and a 2-pin male power cable with clasp (600mm). Mounting bolts are not included and are typically re-used from your old actuator.
