RMT RK23300112X000 Foundation Socket
$54.50
In stock
Genuine RMT RK23300112X000 DC power socket foundation with built-in illuminated ON/OFF switch. Commonly fitted to electric recliner chairs, corner groups and sofas. Accepts the transformer’s 2 pin plug with locking buckle tabs and outputs 29V DC power via the attached 490mm lead with 2 pin female plug. Flush mounts to the rear of the arm frame using 2 screws (not supplied). Universal Replacement DC Power Socket for Electric Recliners. A direct replacement for models RK23300112X000, RK23300112X000 and RK23200027X000. Suits most electric recliner brands that use this same diamond-shaped mounting face and standard 2 pin plug connection. Includes built-in illuminated switch that lights up when powered ON. Need another size or plug type? See our complete range of power sockets & leads (click here) for alternative plate sizes, cable lengths or plug styles. Need help choosing the right one? Get in touch and we’ll guide you. read more
In stock
- Description
- Technical Specifications
- How To Tutorial
- Reviews (0)
- FAQs
- Add a review
Description
RMT RK23300112X000 DC Power Socket with Illuminated Switch
This genuine RMT DC power socket foundation is a universal replacement for electric recliners, modular lounges and sofas. It mounts flush to the rear of the arm frame and provides the main DC power input connection between your transformer and the chair’s motor or junction box. The integrated ON/OFF switch lights up when powered on, allowing you to easily cut power when not in use for added safety.
Check Your Plate Size & Lead Length Before Ordering
Designed for a flush fit into the rear of the arm carcass, this socket is secured with two screws (not supplied).
- Input: 29V DC via 2 pin male plug (round pin + flat pin) to accept transformer plug with locking buckle tabs.
- Output: 2 pin female plug on a 490 mm cable (including plug).
- Face dimensions: 58.48 mm long × 48.43 mm wide (widest point) × 30 mm (narrowest).
- Mounting cut-out: 47 mm tall × 27 mm wide × 63 mm deep.
- Mounting: Flush mount with two screws (screws not included).
Direct Replacement for Multiple Models
This foundation socket replaces model numbers 23300112X000, RK23300112X000 and 23200027X000. It’s the most widely used DC power socket in motion furniture, suitable for any recliner or lounge using the same diamond-shaped socket and two-screw mounting configuration. Simply match the shape, size and plug type to ensure compatibility before ordering.
Quality Spare Parts from Sofa Rehab
We stock both genuine OEM and carefully vetted generic components because we believe in your right to repair. Each foundation socket is batch-tested to meet Australian 250 V / 2.5 A safety standards and carries ERAC certification. By replacing only the failed socket (not the whole transformer set) you save money and reduce e-waste—exactly why we work with suppliers willing to sell unbundled components.
Save Time & Money and Do It Yourself
Replacing this socket takes under ten minutes with only a Phillips-head screwdriver—no prior experience needed. Follow our step-by-step tutorial or watch the video in the “How To” tab, then sit back and enjoy the satisfaction of a job well done.
Technical Specifications
Technical Specifications
Technical Specifications
- Product Name: RMT RK23300112X000 DC Power Socket Foundation
- Manufacturer: Remacro Motion Technology (RMT)
- Compatible Models: Replaces 23300112X000, RK23300112X000 and 23200027X000
- Application: Electric recliner chairs, lift chairs, sectional lounges and other motion furniture
- Input: 29V DC via 2 pin male plug (round pin + flat pin) with locking buckle tabs to accept transformer output plug
- Output: 2 pin female plug on a 490mm long cable (including plug)
- Switch Type: Integrated ON/OFF toggle switch with built-in illumination when powered ON
- Mounting Style: Flush mount to rear of arm carcass with two screw holes (screws not supplied)
- Face Dimensions: 58.48mm long × 48.43mm (widest point) × 30mm (narrowest point)
- Mounting Cut-Out Size: 47mm tall × 27mm wide × 63mm deep
- Cable Length: 490mm including plug
- Housing Shape: Diamond-shaped front plate with black plastic body
- Voltage Rating: 29V DC (typical for recliner transformer output)
- Mounting Hardware: Not included
- Country of Origin: China (RMT factory production)
How To Tutorial
How To Tutorial
How To Replace the RMT RK23300112X000 DC Power Socket
Safety first: Disconnect the chair from mains power before you begin. Allow a few minutes for any stored charge in the transformer to dissipate. Use safe lifting techniques (bend your knees, keep your back straight) and get a second person to help tip or move the chair if needed.
Take a photo before you start. A quick photo of the existing socket, cable routing, and plugs will make reassembly simple and help you match orientation and wiring.
Tools & What’s Included
- Included: DC power socket foundation with 490 mm output lead (female 2-pin plug). Mounting screws are not supplied.
- You’ll need: Phillips screwdriver, small flat screwdriver (optional for tabs), torch, and a clean container for old screws.
Fitment Notes
- Mounting: Flush-mount with 2 screws to the rear of the arm carcass.
- Face shape/size: Diamond front plate ~58.48 mm long; ~48.43 mm widest; ~30 mm narrowest.
- Cut-out required: 47 mm (tall) × 27 mm (wide) × 63 mm (deep).
- Connectors: Input 2-pin male on the foundation (accepts transformer plug with locking buckle tabs). Output 2-pin female plug on the attached 490 mm lead.
Step-by-Step Instructions
- Unplug from the wall. Remove the AC plug from the mains outlet. If your transformer has a battery backup, remove the batteries.
- Access the socket. Gently tilt the chair onto its side (use safe lifting techniques and a helper). Locate the diamond-shaped power socket at the rear of the arm carcass.
- Document the setup. Take a clear photo of the socket, screw positions, and the cable routing to the motor/junction box.
- Disconnect the transformer lead. Press the locking buckle tabs and pull the 2-pin transformer plug straight out of the socket’s input.
- Unscrew the old socket. Remove the two mounting screws and slide the old socket body out of the cut-out.
- Unplug the output lead. Trace the existing output lead to the motor/junction box and unplug the 2-pin connector. Note the routing and any clips.
- Prepare the new socket. Feed the new socket’s output lead (female 2-pin) through the frame along the original path to the motor/junction box.
- Reconnect the output. Push the 2-pin female plug into the matching male on the motor/junction box until fully seated.
- Seat the socket body. Insert the new socket into the 47 mm × 27 mm cut-out, ensuring the ON/OFF switch faces outward and sits level.
- Secure the socket. Use two suitable wood/metal screws (not supplied) to fasten the front plate flush to the arm carcass. Do not overtighten.
- Connect the transformer. Insert the transformer’s 2-pin plug into the socket’s input until the locking buckle tabs click.
- Function test. Return the chair upright. Plug into the wall. Switch the socket to ON (the switch will illuminate) and test recline functions. Switch OFF when finished.
Reviews (0)
Thank you for making an effort to leave a reivew but to protect against spam we only accept reviews from verified owners. Please proceed to login using the same email address you used when ordering the product.
Customer Login
- There are no reviews yet.
FAQs
FAQs
Will this fit my recliner chair?
Yes, this socket is the most widely used DC power foundation in motion furniture. It directly replaces models 23300112X000, RK23300112X000, and 23200027X000. Simply check that your existing socket has the same diamond-shaped face, two mounting screws, and standard 2-pin (round + flat) plug connection.
Do I need an electrician, or can I fit it myself?
It’s designed as a straightforward DIY job—two screws and a push-in low-voltage plug. Provided you disconnect the chair from mains power first and follow the step-by-step guide, no electrical licence is required in Australia. If you’re uncomfortable lifting the chair or working around wiring, you’re welcome to engage a professional, but most customers complete the install in under ten minutes.
Does it come with mounting screws?
No, mounting screws are not supplied because recliner manufacturers use varying screw lengths and thread types. You can reuse your original screws or use small wood or metal screws suited to your frame.
How do I know if my transformer will plug into this socket?
If your transformer output lead has a 2-pin “OI” style plug with locking buckle tabs, it will plug directly into this socket. The built-in male plug on the foundation accepts that common connector and delivers 29 V DC to your chair’s motor or junction box.
The switch lights up – is that normal?
Yes. The built-in power switch will illuminate when in the ON position to show that power is active. Switching it OFF will isolate the power supply and is recommended when the recliner is not in use.
