LMD6208C1-3 Pride Recliner Actuator
Original price was: $240.00.$191.99Current price is: $191.99.
Extended range item: ships directly from supplier.
Genuine Pride Mobility MotoMotion LMD6208C1-3 electric lift recliner actuator, designed to replace faulty motors in compatible Pride and Theorem lift chairs. Features a green male 5-pin DIN connector, 24V DC operation and a 165mm stroke length. Supplied as a complete actuator with mounting ends and electrical lead.
Compatible Replacement Actuator Model Numbers. Direct replacement actuator for models LMD6208C-U-3, LMD6208C-3 and LMD6208C1-3. Compare the model number, connector and mounting arrangement with your existing actuator before ordering.
Not the Recliner Actuator You're Looking For? We stock a wide range of popular leading brands of recliner actuators & motors (click here) to browse our extensive range or contact us if you require assistance.
read moreExtended range item: ships directly from supplier.
- Description
- Technical Specifications
- How To Tutorial
- Compatible Models
- Reviews (0)
- FAQs
- Add a review
Description
Genuine Pride Mobility MotoMotion LMD6208C1-3 Lift Recliner Actuator
Restore the movement of your electric lift recliner with this genuine Pride Mobility MotoMotion/HHC LMD6208C1-3 replacement actuator. Designed for compatible Pride Mobility and Theorem lift chairs, this electric recliner motor actuator provides the powered movement required to operate the chair’s reclining or lifting mechanism.
Featuring a green male 5-pin DIN connector, 24V DC operation and a 165mm stroke length, this actuator is supplied complete with its mounting ends and electrical lead, ready to replace a matching faulty unit.
Known Compatible Replacement Model Numbers
This LMD6208C1-3 recliner actuator is a confirmed replacement for the following model numbers:
- LMD6208C1-3
- LMD6208C-U-3
- LMD6208C-3
- LMD6208C1-31
- MOT1707192
These model numbers may be printed on the identification label of your original actuator. If your existing motor displays one of these model numbers, this replacement offers a suitable solution, provided the electrical connector and mounting configuration also match.
Australia’s Leading Supplier of Recliner Chair Spare Parts
Sofa Rehab is Australia’s leading supplier for electric and manual recliner spare parts, leather and timber repair kits and general upholstery items. Get expert advise and top quality parts at the lowest prices on DIY repairs and if your a trades person who needs to buy in bulk, we also offer bulk buy discounts.
Save Time & Money, Do It Yourself!
With our wide range of repair products, our easy step-by-step instructions and video tutorials, you’ve got everything you need to repair it yourself. Feel great about having done the repair yourself and saved $$$ on the repair.
Technical Specifications
Technical Specifications
Technical Specifications
| Product Type | Electric Lift Recliner Actuator / Motor |
|---|---|
| Brand | Pride Mobility |
| Manufacturer | MotoMotion / HHC |
| Model Number | LMD6208C1-3 |
| Replacement Model Numbers | LMD6208C-U-3, LMD6208C-3, LMD6208C1-31 |
| Voltage | 24V DC |
| Maximum Current | 4.5A |
| Stroke Length | 165mm |
| Electrical Connector | Green 5-Pin DIN Plug |
| What’s Included | Complete Actuator with Mounting Ends and Electrical Lead |
| Application | Compatible Pride Mobility Electric Lift Recliner Chairs |
Important: Before ordering, compare the model number, connector and mounting arrangement with your existing actuator to confirm compatibility.
How To Tutorial
How To Tutorial
How to Replace the Pride Mobility MotoMotion LMD6208C1-3 Actuator
Replacing a faulty MotoMotion LMD6208C1-3 actuator in a compatible Pride Mobility electric lift recliner can be a manageable DIY repair with basic tools. Follow these steps to identify, remove and replace your existing actuator safely.
Before You Begin
Make sure your replacement actuator matches the existing model, electrical connector and mounting arrangement. The LMD6208C1-3 is a confirmed replacement for LMD6208C-U-3, LMD6208C-3 and LMD6208C1-31 actuator models.
Important Safety Information: Disconnect the recliner from mains power before beginning. The lifting and reclining mechanisms can contain heavy moving components and pinch points. Securely support all moving sections of the chair before removing any mounting pins or fasteners. Never rely on the actuator itself to support the mechanism while it is being removed. If the mechanism cannot be safely supported or the replacement does not align correctly, seek professional assistance.
Step 1: Access the Existing Actuator
Position the recliner so you can safely access the actuator underneath the chair. Depending on the chair design, this may require assistance to carefully position the chair without damaging its upholstery or mechanism. Ensure the recliner is stable and cannot move or tip during the repair.
Step 2: Identify the Actuator and Its Connections
Locate the existing electric actuator attached to the recliner mechanism. Check its identification label for the model number and confirm that it matches one of the compatible models listed above.
Locate the green 5-pin DIN electrical connector and take a photograph of the actuator, its wiring and both mounting points before disassembly. This will provide a useful reference when installing the replacement.
Step 3: Disconnect the Electrical Plug
With the chair disconnected from mains power, carefully unplug the actuator’s green 5-pin DIN connector from its mating connection. Hold the plug body rather than pulling on the electrical cable. Release any retaining clips or cable ties where necessary, noting how the wiring is routed.
Step 4: Remove the Existing Actuator
Confirm that the chair mechanism is securely supported and there is no load or tension on the actuator mounting points.
Locate the mounting pins or fasteners securing the actuator at each end. Remove the retaining clips or other locking hardware, then carefully withdraw the mounting pins or fasteners. Support the actuator while removing the final attachment to prevent it from dropping or shifting unexpectedly.
Note: Mounting hardware and access arrangements can vary between lift recliner models. Keep all reusable pins, clips and fasteners in a safe place for reinstallation.
Step 5: Compare the Old and New Actuators
Place the original actuator beside the replacement LMD6208C1-3 and compare the mounting ends, electrical connector, cable arrangement and overall configuration.
The replacement features a 24V DC motor, a 165mm stroke and a green 5-pin DIN connector. Do not attempt to force an actuator into position or modify its mounting points if the components do not match.
Step 6: Install the Replacement Actuator
Position the new actuator in the same orientation as the original unit. Align the mounting points with the chair’s mechanism and refit the original mounting pins or suitable manufacturer-specified hardware.
Secure each mounting point with its retaining clip or locking fastener. Check that both ends are properly attached and that the actuator and surrounding mechanism are free from obstruction.
Important: Do not force the actuator to extend or retract to align the mounting holes. If the holes do not align naturally, stop and seek advice rather than applying power to an unsecured actuator.
Step 7: Reconnect the Electrical Cable
Reconnect the green 5-pin DIN plug to its matching socket, ensuring it is correctly aligned and securely seated. Route the electrical lead along its original path, keeping it clear of moving components, sharp edges and potential pinch points.
Refit any cable retaining clips or ties that were removed during disassembly.
Step 8: Test the Recliner
Once the actuator is securely installed, remove all tools and ensure that nobody is beneath or near the moving mechanism. Return the recliner to its normal operating position before reconnecting the power supply.
Operate the chair using its handset or control buttons, initially using short movements to check that the actuator moves in the correct direction and operates without binding, unusual noises or interference.
If everything operates normally, carefully test the recliner through its intended range of movement. Stop immediately if the mechanism binds, the actuator strains or the chair behaves unexpectedly.
Need Help Identifying Your Replacement Motor?
If you are unsure whether the LMD6208C1-3 is the correct actuator for your Pride Mobility recliner, Sofa Rehab is here to help. Contact our team with photographs of your original motor’s identification label, electrical connector and mounting arrangement, and we can assist you with selecting the correct replacement part.
Compatible Models
Compatible Models
Compatible Models & Replacement Part Numbers
The genuine Pride Mobility MotoMotion/HHC LMD6208C1-3 actuator is a replacement for the following lift recliner actuator models and associated part numbers.
Compatible Actuator Model Numbers
- LMD6208C1-3
- LMD6208C-U-3
- LMD6208C-3
- LMD6208C1-31
- MOT1707192
Important Compatibility Information
These model numbers are associated with compatible Pride Mobility lift recliner actuator assemblies. The replacement supplied by Sofa Rehab features a green 5-pin DIN connector, 24V DC operation and a 165mm stroke length.
Before ordering, compare your existing actuator’s model number, electrical connector and mounting arrangement with the replacement product. Compatibility should be confirmed using the original actuator details rather than the recliner brand alone.
Need Help Finding the Correct Actuator?
If your existing actuator has a different model number or you are unsure about compatibility, contact Sofa Rehab with photographs of the motor label, electrical connector and mounting ends. Our team can help you identify a suitable replacement for your electric lift recliner.
Reviews (0)
Thank you for making an effort to leave a reivew but to protect against spam we only accept reviews from verified owners. Please proceed to login using the same email address you used when ordering the product.
Customer Login
- There are no reviews yet.
FAQs
FAQs
What actuator replaces the Pride Mobility LMD6208C-U-3 lift chair motor?
The genuine MotoMotion LMD6208C1-3 actuator is a compatible replacement for the LMD6208C-U-3, LMD6208C-3 and LMD6208C1-31 models, as well as Pride Mobility part number MOT1707192. It features a green 5-pin DIN connector and a 165mm stroke length. Always compare the electrical connector and mounting arrangement with your original motor before ordering.
Is the MotoMotion LMD6208C1-3 actuator compatible with my Pride Mobility lift recliner?
The LMD6208C1-3 is designed for compatible Pride Mobility electric lift recliner chairs. However, not all Pride recliners use the same motor. Check the model number printed on your existing actuator, along with its green 5-pin DIN connector and mounting ends. If you're unsure, send Sofa Rehab photographs of your original motor and its identification label for assistance.
What are the specifications of the Pride MotoMotion LMD6208C1-3 actuator?
The genuine MotoMotion/HHC LMD6208C1-3 actuator operates on 24V DC with a maximum current rating of 4.5A and a 165mm stroke length. It uses a green 5-pin DIN electrical connector and is supplied as a complete replacement actuator with mounting ends and electrical lead.
Why has my Pride Mobility electric lift recliner stopped lifting or reclining?
A Pride Mobility lift recliner that stops moving, operates intermittently or fails to complete its movement may have a faulty actuator. However, problems with the power supply, handset remote, wiring or electrical connections can cause similar symptoms. Before replacing the motor, check the power supply and accessible connections, and confirm that the actuator is the faulty component.
Can I replace my Pride Mobility lift chair actuator myself?
Yes, replacing a matching Pride Mobility lift recliner actuator can be a DIY repair for someone comfortable with basic tools and furniture maintenance. Disconnect the chair from mains power, securely support the moving mechanism and carefully remove the original actuator's mounting fasteners and electrical connection. Install the matching replacement using the correct mounting hardware. If the mechanism is under tension or the mounting points do not align, seek professional assistance rather than forcing the installation.
Related products
Original price was: $165.00.$131.99Current price is: $131.99.
Mulin Electric ML8-205 Recliner Motor
Original price was: $160.00.$127.99Current price is: $127.99.
Kaidi KDYJT006-20 Recliner Motor
Original price was: $285.00.$120.00Current price is: $120.00.
TiMotion TA9-2060-004 Motor
Original price was: $240.00.$191.99Current price is: $191.99.






