- Description
- Technical Specifications
- How to
- Reviews (0)
- FAQs
- Add a review
Description
eMoMo Power Recliner Switch with USB and Home Function (HX90NC2LU)
This replaces the HX90NC2LU switch used on many powered recliners and theatre lounges. Featuring 2 rocker-style controls to provide directional movement (press one side to move, the other to reverse). The small centre button returns the chair to Home, and the USB port provides convenient device charging. Function assignments can vary by manufacturer and wiring, so selection should be based on the model code.
Chosing The Right eMoMo Switch Replacement
Check the label on your existing switch. If it shows HX90NC2LU, order this page. If it shows HX90C2LU, use the companion version instead: eMoMo HX90C2LU (click here). Appearance is similar across variants; wiring and assignments can differ. Matching the code is the reliable method.
Don’t hesitate to contact us for any assistance finding the right replacement. We stock a wide range of replacements control switches and other electric recliner spares.
Control Behaviour and Functions
The faceplate presents two rocker-style controls. Each rocker is multifunction: press one side to move in one direction and the opposite side to reverse. A small centre push button returns the chair to its Home position. Some furniture also routes LED or cup holder lighting through this controller. Which functions are assigned can vary by brand and harness.
DIY Replacement, “You Can Do It”
Remove the trim cover, undo the screws, unplug the harness, connect the new switch and refit. A screwdriver is typically all that is required. Follow our step-by-step guides and video tutorials to complete the job yourself and save on service costs.
Genuine Replacement Parts from Sofa Rehab
We support repairs by supplying genuine OEM parts and quality equivalents, so you replace only what has failed rather than larger assemblies, and without incuring the cost of an in-home repair visit. Enjoy the satisfaction of repairing it yourself. If the label is unclear or missing, send us a photo of the old switch and connectors. Our team can confirm the correct part for your chair.
Technical Specifications
Technical Specifications
Make – eMoMo Tech.
Model Number –HX90NC2LU
Function –Front buttons operates the footrest, rear buttons operates the headrest and middle button is the home button.
Location – Right hand side when seated in the recliner.
Colour –Silver.
Material –Plastic housing and metal fascia.
Plug –Straight Din 5 pin plug with retaining prongs.
Dimensions – External fascia is Width 103 mm, Depth 34 mm. Thickness including housing and buttons is 42 mm.
Main Cable – Length is 1450 mm maximum.
Blue Light Cable – Length is 800 mm.
Red Light Cable – Length is 800 mm.
How to
How to
- Unplug all power to the recliner and remove the mains plug from the wall socket.
- Lay down a drop sheet on the floor in front of the recliner chair.
- Unclip the metal outer screw cover off to expose the 2 screws.
- Remove the screws and then pull out the switch casing to allow it to hang freely by its cable.
- Carefully turn the recliner over on its front side to gain access to the recliner wiring underneath.
- Locate where the original cabling currently fits and make notes of how it’s routed (recommended to take a photo).
- Cut and remove any cable ties holding the switch in place then unplug it from the actuator motor, LED lights and cupholder.
- You should be able to remove fully the broken switch from the recliner.
- Feed the replacement switch through the outside arm plug first until the switch housing is snug into the arm hole.
- Connect the 3 plugs into the corresponding plugs securely.
- Secure any free cabling into the same position as the original using cable ties, be sure to check the cable is not caught up and not too tight or at risk of being trapped during motion.
- Carefully turn the recliner back over to the standing position.
- Angle the switch rotation first and then work on screwing in the 2 housing screws for the toggle switch.
- Put the metal switch cover back on to hide the screws.
- Reconnect the power and switch it on.
- Test the replacement toggle switch by operating the recliner to its maximum opening and closed position. When fully open, look inside to see that the cabling is safely out of harms way and is not stretched or pinched.
- Test the USB charge port and light features.
Reviews (0)
Thank you for making an effort to leave a reivew but to protect against spam we only accept reviews from verified owners. Please proceed to login using the same email address you used when ordering the product.
Customer Login
- There are no reviews yet.
FAQs
FAQs
Will this work my recliner?
This switch is suitable for electric recliners with a dual actuators/motors and fits to the right hand facing side of the recliner. You will also need to check your actuator accepts a 5 pin round din plug and 2 x 2 pin light plugs.
Does the USB port charge my device?
Yes, the USB has a 5V 2A power rating this may limit the size of the device you wish to charge. A smartphone, Ipad etc is okay however a laptop etc may be limited.
Will the switch suit left and right sides of the recliner?
It will only fit to the right hand side.
My switch looks the same will it still work?
The model number must be the same as ours to work. Model HX90NC2LU.
Is this switch easy to fit ?
Yes, very simple and no experience is required. See our "How to " tab for detailed step by step instructions. We even supply the screws.