Okin JLDQ.19.413.41.177K01 Recliner Motor
$195.00
In stock
A complete genuine OEM replacement recliner chair and sofa Linear actuator/motor. Dewert Okin model number JLDQ.19.413.41.177K01. Install length 413mm and stroke length is 177mm and comes complete with male 5 pin din plug. This actuator plugs into a control box and is part of an operating system. We Only Stock Genuine Okin Electrical Parts. Remotes, Cables or Power Supplies. We stock them all! Quality, Durable And Reliable. This part comes with our 12 Month replacement warranty. So you can be assured of quality and compatibility in the replacement for your recliner. read more
- Description
- Specifications
- How To
- Reviews (0)
- Add a review
Description
Dewert Okin JLDQ.19.413.41.177K01 Actuator
A complete replacement Linear actuator/motor unit which is fully factory assembled and ready to install. This actuator is designed to connect with a Okin control box and part of a operating system using the 5 pin male din plug identified by the blue tape around the cable. Ultra quite, swift and smooth operation are just some of the benefits of installing a quality part from Sofa Rehab.
Okin Refined Electronics From Sofa Rehab
Knowing your getting genuine parts means that you’ll know the cables, plugs and fixing points are all the exact same and a straight swap out for super easy installation.
Trusted Supplier To The Trade!
With our wide range of repair products, our easy step-by-step instructions and video tutorials, you’ve got everything you need to repair it yourself. Feel great about having done the repair yourself and saved $$$ on the repair.
Specifications
Specifications
Make –Dewert Okin
Model Number –JLDQ.19.413.41.177K01
Stroke –177MM
Install Length –413MM
Duty Cycle –1min ON/8min OFF
Rated Voltage –24-29V 100W
Max Load –4000N
Speed –7mm/s
How To
How To
1, Unplug all power to the recliner and remove the mains plug from the wall and check no power
2, Lay a drop sheet on the floor and carefully turn the recliner over on its side or back, please remember safe lifting techniques
3, Check and make a note of how the cables are situated on the recliner frame (photograph is a good idea)
4, Remove any cable clips with pliers/cutters, unplug all linked plugs
5, Detach the Actuator/Motor pin and R clips from the clevis mounts and remove the part fully
6, Install the new Actuator/Motor by refitting the pins and R clips
7, Connect and plug all plugs in to control box
8, Route the cables and attach in position with new cable clips
9, Carefully turn the furniture back over to the standard position
10, Reinstate the power and then fully test the recliner carefully checking all cables are in the correct position and are not being pinched or stretched.
Reviews (0)
Thank you for making an effort to leave a reivew but to protect against spam we only accept reviews from verified owners. Please proceed to login using the same email address you used when ordering the product.
Customer Login
- There are no reviews yet.
