Bed Electrics, Handset Remotes
Okin Bed Remote 1.11.000.035.30
$95.00
In stock
Replacement OKIN adjustable-bed hand control with six easy-press membrane buttons and a coiled 5-pin DIN lead for instant plug-and-play use. Genuine part numbers 1.11.000.035.30 and 1.11-035.30XK23J. Designed as a direct swap for both single & dual motor adjustable bases running the standard OKIN 29V system – no batteries, pairing or tools needed. If your existing remote shows the same 6-button layout and uses the round 5-pin DIN plug it should connect and operate flawlessly. 6-Button Wired Remote for Adjustable Beds. Fits most OKIN Betadrive, Okimat II/III and similar frames sold through Australian retailers. Simply unplug the old handset and press this one into the 5-pin socket for immediate head-up, foot-up and flat operation. Looking for a Wireless Version or Different Plug? See our full range of electric bed handsets & control parts (click here), or contact our support team if you need help confirming compatibility with your adjustable bed. read more
In stock
- Description
- Technical Specifications
- How To
- Features
- Reviews (0)
- FAQs
- Add a review
Description
Plug-and-Play 6-Button Wired Adjustable Bed Remote – Universal 5-Pin DIN
Replace a lost or faulty hand control in minutes. This genuine OKIN remote (part numbers 1.11 000 035 30 / 1.11-035.30XK23J) has six intuitive buttons for head-up, head-down, foot-up, foot-down plus two combined “raise” and “flat” functions. The coiled lead carries both power and signals through a round 5-pin DIN plug, so there are no batteries to change and no pairing steps – simply plug it in and relax.
Genuine OKIN Quality for Betadrive, Okimat II / III & more
Built by Dewert-OKIN to the same specification supplied with many premium adjustable bases sold by Harvey Norman, Forty Winks, A.H. Beard and other Australian retailers. Suitable for any OKIN dual-motor system running on the standard 29 V DC line, including Betadrive and Okimat actuators, and factory-tested for smooth, quiet operation.
Check Your Plug & Button Layout Before Ordering
This handset fits beds that use a round 5-pin DIN plug and the identical six-button layout. If your old remote matches those two points, it will connect and operate flawlessly. It will not fit 7- or 8-pin plugs, RJ (telephone-style) sockets or wireless RF/Bluetooth controls. Unsure? Snap a photo of your plug and message us – we’ll confirm the right part.
Save Time & Money, Do It Yourself
Do-it-yourself repairs cut call-out fees and give you the satisfaction of a job well done. And if you hit a snag, our phone, email and live-chat support is ready to help – because You Can Do It!
Technical Specifications
Technical Specifications
Make – Okin Refined/ Dewert
Model Type – Baseline
Model Number – 1.11.000.035.30 or 1.11-035.30XK23J
Handset Size – 175 x 57 x 22mm (approximately)
Plug – 90° 5 pin din.
Cable Length – Part coiled and straight, 1600mm (approximately)
How To
How To
Step-by-Step Installation Guide – Safe & Simple
- Disconnect power first.
Pull the bed’s mains plug from the wall and wait 30 seconds so any stored charge in the system can discharge. - Locate the actuator socket.
On this OKIN setup the handset lead plugs directly into the actuator motor mounted under the base (there is no separate control box).
• If you need to tip the bed or raise the platform, bend your knees, keep your back straight and enlist a helper for anything heavier than 20 kg.
• Clear the surrounding area so you have stable footing and good light. - Take a reference photo.
Use your phone to snap a clear picture of the actuator and every cable connected to it before you unplug anything.
This “before” photo makes re-assembly fool-proof. - Remove the old handset plug.
Grip the round 5-pin DIN collar where it enters the actuator and then pull straight out. - Connect the new remote.
Line up the notch on the new 5-pin plug with the keyway in the actuator socket, push it fully home.
Route the coiled lead so it can’t snag or be crushed when the bed moves. - Restore power & test.
Plug the bed back into the wall. Press each button once – head-up, foot-up, and “flat” should all respond immediately.
Safe lifting checklist
- Lift with your legs, not your back; hold the load close to your body.
- Plan your path before moving the base or mattress.
- Use furniture sliders or get a second person for heavy frames.
- Never twist while lifting – pivot with your feet instead.
Need help?
If you hit a snag, send us the photo you took and our phone, email or live-chat team will guide you step by step – because You Can Do It!
Features
Features
Handset Features
Head – Up/Down.
Foot – Up/Down.
Dual – Up/Down.
Massage –Head, Foot or All.
Light –On/Off.
Storage Hook.
Reviews (0)
Thank you for making an effort to leave a reivew but to protect against spam we only accept reviews from verified owners. Please proceed to login using the same email address you used when ordering the product.
Customer Login
- There are no reviews yet.
FAQs
FAQs
Will this handset work with my adjustable bed frame?
Yes, if your current remote (or socket on the control box) uses a round 5-pin DIN connector and the same six-button layout, this replacement will be a direct plug-in swap. It’s compatible with most OKIN Betadrive and Okimat II/III dual-motor systems running on 29 V DC.
he part number on my old remote is 1.11-035.30 XK23J—does that matter?
No. The codes 1.11 000 035 30 and 1.11-035.30 XK23J refer to the same electronic design; the suffix simply denotes factory batch details. Functionally, the handsets are identical and interchangeable.
How do I install the new remote—do I need to pair or program it?
No pairing is required. Unplug the bed at the wall, twist-unlock the existing 5-pin plug from the control box, push the new plug in (aligning the notch), lock it, then restore power. Total swap-over time is under five minutes.
My old remote has an 8-pin plug—can I still use this replacement?
Unfortunately not. Handsets with 7- or 8-pin DIN plugs (or RJ telephone-style connectors) use different wiring and protocols. Send us a photo of your plug and we’ll help you find the correct model.
Who makes this remote controller?
This is made by Okin/Dewert who are a reputable manufacturer of recliner electronics.
Does the handset come with a warranty?
Yes. As a genuine OKIN part it carries a 12-month warranty covering manufacturing defects. If you encounter any issues during that period, contact Sofa Rehab for troubleshooting, repair or replacement.
