Manual Recliner Spare Parts, Mechanism
4341 Manual Recliner Mechanism 600mm LHO
$345.00
In stock
The 4341 manual recliner mechanism by Leggett & Platt is a flat-pack replacement for broken or bent recliner frames. Built from heavy-gauge, powder-coated steel with Delrin™ bushes and machine-pressed rivets, it delivers smooth operation, close-to-the-wall action and rock-solid floor stability. Rated to 181kg (approx. 160kg occupant), this version suits a 600mm seat frame width and left-hand operation. 600mm Left Hand Manual Recliner Mechanism. Includes a 43-piece flat-pack with side actions, drive shaft, base rails, springs, handle, release cable and fixings. Measure seat width between the inside seat rails. Configured for left-hand operation. Thinking of Upgrading to Electric Recliners? This range comes in 500mm, 550mm, 600mm and 700mm seat widths and in left or right-hand operation. You can even convert to electric with our other kits. See our recliner mechanisms category (click here). read more
In stock
- Description
- Technical Specifications
- What's in the Box
- How-To Tutorial
- Reviews (0)
- FAQs
- Add a review
Description
4341 Manual Recliner Mechanism – 600 mm Left Hand Kit (Flat Pack Kit)
This 4341 replacement recliner mechanism is designed for recliner chairs, 2-seaters, 3-seaters, and sectional lounges that require a 600mm seat frame width. Manufactured by Leggett & Platt, it is built from heavy-gauge steel with Delrin™ bushes and machine-pressed rivets for strength and smooth operation. It features “EZ Operation”, close-to-the-wall action, and metal-to-floor stability, with a load rating of 181 kg (suitable for occupants up to 160 kg).
What’s in the Box (43-Piece Kit)
Everything needed to build the frame:
- Side actions (LH/RH)
- Drive shaft and stabilisers
- Base rails and cross-members
- Return and assist springs
- Release handle and cable
- Linkage components and bushes
- KD brackets and all required bolts/fixings
See our ‘Whats in the Box’ tab for the full list of parts and quantities.
Measuring Your Seat Frame Width
This mechanism is available in 500mm, 550mm, 600mm and 700mm seat widths. The seat width is measured side-to-side between the inside of the left and right seat rails. Please measure carefully to match your recliner frame and select the correct size before ordering.
Left- or Right-Hand Operation Explained
From the seated perspective, if you operate the release handle with your left hand, choose a LHO mechanism. If you operate it with your right hand, choose a RHO mechanism. Matching the side of your recliners release handle ensures your new mechanism aligns with the existing linkage and handle position.
When to Replace a Mechanism and Power Conversion Option
Whether the frame has been bent, a rivet has loosened, a linkage has snapped, or the action no longer tracks, replacing the complete mechanism restores original feel. If you’re re-framing the seat anyway, you can also choose to convert to powered operation. We stock manual and electric mechanisms across multiple sizes and handed options. Browse our mechanisms range (click here) or ask us for guidance.
DIY Friendly – Assemble and Save
Supplied flat-pack with fixings included. With a socket set and basic tools, most DIYers can assemble the frame in about 40 minutes and refit the seat to the chair base. Follow our step-by-step instructions, enjoy the satisfaction of doing it yourself and save!. If you get stuck at any stage, our support team is a phone call or chat message away.
Technical Specifications
Technical Specifications
Technical Specifications
| Model | 4341 manual recliner mechanism |
|---|---|
| Manufacturer | Leggett & Platt |
| Construction |
|
| Operation |
|
| Load Rating | 181 kg capacity Suitable for occupant weights up to 160 kg |
| Widths Available | 500mm, 550mm, 600mm, 700mm |
| How to Measure Seat Width | Measure side-to-side between the inside faces of the left and right seat rails. |
| Handed Operation |
|
| Compatibility | Supplied with large plastic oval handle and release cable. Also works with:
|
| Kit Contents | 43 pieces See “What’s In The Box” tab for full breakdown. |
| Assembly | Flat-pack self-assembly using a socket set and spanner |
| Estimated Assembly Time | Approximately 30–40 minutes with basic handyman skills |
| Applications |
|
| Brand Interchangeability | Designed by Leggett & Platt; can replace many RMT and generic mechanisms. Note: Minor modification or alteration may be required depending on frame design. |
What's in the Box
What's in the Box
What's in the Box
Flat-pack kit (43 pieces) — everything needed for assembly is included, except the tools (socket set and spanner). Inside the box:
- 2× 4341 side actions (1× left, 1× right)
- 1× drive shaft
- 3× stabiliser bars
- 2× base rails
- 4× glides with nuts
- 2× springs — 1× 117 mm lockdown spring; 1× 180 mm footrest release spring
- 1× large oval plastic recliner handle (115 mm × 70 mm × 38 mm)
- 1× recliner release cable
- 1× retaining clip for the handle
- 1× release linkage (left-hand or right-hand, as ordered)
- 1× pair of KD backrest brackets (fasteners not supplied)
- 19× bolts and fixings
Total: 43 pieces — a complete replacement kit ready for assembly and installation.
How-To Tutorial
How-To Tutorial
How to Install
The 4341 manual recliner mechanism kit comes flat-packed and requires assembly before fitting into your furniture. Follow the steps below with a socket set, spanner, Phillips screwdriver, and pliers (optional for spring fitting). Estimated assembly and installation time is 30–40 minutes.
Tools required:
- Socket set
- Spanner
- Phillips screwdriver
- Pliers (optional, for spring fitting)
Step 1 – Assemble the side actions and drive shaft
Lay out the left and right side actions. Connect them using the drive shaft, ensuring the largest side is in the fully retracted position. Fix in place with 2x 25mm bolts.
Step 2 – Install the stabiliser bar
Position the stabiliser bar with the 90° flat end just behind the drive shaft. Secure with 4x 13mm bolts.
Step 3 – Install the front and rear stabiliser tubes
Fit both stabiliser tubes to the frame and fix with 8x 13mm bolts.
Step 4 – Install the front and rear base rails
Attach the base rails using 4x 13mm bolts and 4x glides with nuts.
Step 5 – Fit the release linkage
Install the cable release linkage mechanism (left or right, depending on your order) with 1x 13mm bolt.
Step 6 – Attach the springs
Fit the springs in their correct positions. Use pliers if required to stretch and secure.
- 117mm lockdown spring
- 180mm footrest release spring
Step 7 – Install the mechanism into your furniture
Position the assembled mechanism into your recliner frame and secure using the original fixings and mounting points from your old mechanism.
Step 8 – Fit the handle and cable
Install the supplied oval plastic handle and release cable with a Phillips screwdriver. If reusing an existing handle style, fit that instead (plastic oval, small oval, paddle lever, or D-pulley parachute).
Step 9 – Refit the backrest
Slide the backrest into position. If you need to adjust or replace the KD brackets supplied with the kit, do so now, reusing your original fasteners if required.
Step 10 – Test the recliner
Once everything is secured, sit in the chair and operate the handle or lever to confirm smooth opening and closing. Check that the springs engage correctly and the mechanism locks firmly in place.
Reviews (0)
Thank you for making an effort to leave a reivew but to protect against spam we only accept reviews from verified owners. Please proceed to login using the same email address you used when ordering the product.
Customer Login
- There are no reviews yet.
FAQs
FAQs
What sizes are available and how do I measure correctly?
We stock 500 mm, 550 mm, 600 mm and 700 mm seat widths. To measure your recliner, take the recliner mechanism out and measure side-to-side between the inside faces of the two seat rails (left to right). Match this measurement as closely as possible to one of our standard sizes before ordering.
How do I know if I need left-hand or right-hand operation?
Sit in your recliner as normal. If you use your left hand to pull the release handle, you need a left-hand mechanism. If you use your right hand, then you need a right-hand mechanism. This ensures the handle position matches your existing setup.
Can I upgrade my manual recliner to an electric version?
Yes, you can. We supply a range of complete electric recliner mechanisms and upgrade kits. These allow you to transform your manual recliner into a powered version with simple push-button or remote control operation.
What tools do I need to assemble and install the kit?
You will need a socket set, spanner, and a Phillips screwdriver. Pliers are optional but can help when fitting the springs. All fixings and components are supplied in the kit, so no additional parts are needed.
Is this mechanism compatible with different handle styles?
Yes. The kit is supplied with a large metal oval handle and release cable, but it can also work with small oval handles, plastic handles, paddle levers, and D-pulley parachute style releases. You can reuse your original handle or purchase an alternative from our range.
Do you offer an assembly service?
No, we do not. This mechanism is supplied only as a flat-pack kit for worldwide shipping. It is designed for DIY assembly and installation with basic tools and handyman skills.
