HHC HSW302-CT 2 Button Controller
$129.00
In stock
Replacement HHC electric recliner HSW302-CT, 2 button power recliner remote control wand with USB charge port which will operate most standard electric recliner chairs, sofas and lift recliner chairs. The cable is straight & has a straight 5 pin din plug. HHC Electric Recliner Chair Controller 2 Button Remote for recliner chair or lift chair controller replacement with 2 large illuminated and easy to press buttons. 'You Can Do It' Yourself and Save $$$. Easy fitting in under 5 minutes. No handyman skills required and no tools or experience required. read more
In stock
- Description
- Technical Specifications
- How To
- Reviews (0)
- FAQs
- Add a review
Description
HHC Electric Recliner Remote Controllers
A replacement HSW302-CT 2 button 5 pin electric lift chair and standard electric recliner remote, with 2 easy to use illuminated buttons. This electric recliner chair replacement remote controller comes ready to install and is designed to control the open/close footrest/backrest recliner mechanism in order for the furniture to recline and depending on model of chair lift/tilt.
Features Include USB port, Straight cable 1850mm (approximately) total length which can be separate half way via a lift and release clip and straight 5 pin din plug.
Fits comfortably in your palm, clear and easy to push buttons and responsive smooth operation are just some of the benefits of installing a quality part from Sofa Rehab.
Australia's Leading Supplier of Recliner Chair Spare Parts
We’re Australia’s Leading Supplier for Repair Kits and Spare Parts. Get the lowest prices on DIY repairs and if your a trades person who needs to buy in bulk, we also offer bulk buy discounts
Save Time & Money and Do It Yourself
With our wide range of repair products, our easy step-by-step instructions and video tutorials, you’ve got everything you need to repair it yourself. Feel great about having done the repair yourself and saved $$$ on the repair.
Technical Specifications
Technical Specifications
Make – HHC
Model – HSW302-CT
Cable Length – 2050 mm (approximately) straight cable with a retaining clip and extension cable which can be separated. Extension part is 595mm (approximately) long.
Handset size – 147 x 42 x 27mm. (Sizes taken end to end and centre)
Plug Type – Straight 5 pin din.
USB Rating – 5v 2A.
How To
How To
Unplug all power to the recliner and remove the mains plug from the wall socket. Lay down a drop sheet on the floor in front of the recliner chair.
Carefully turn the recliner over on its front side to gain access to the recliner wiring underneath.
Locate where the original cabling currently fits and make notes of how it’s routed (recommended to take a photo).
Cut and remove any cable ties holding the cable in place then unplug it from the actuator motor.
You should be able to remove fully the broken controller from the recliner.
Feed the replacement controller through the outside arm.
Secure any free cabling into the same position as the original using cable ties, be sure to check the cable is not caught up and not too tight or at risk of being trapped during motion.
Carefully turn the recliner back over to the standing position.
Test the replacement controller by operating the recliner to its maximum opening and closed position. When fully open, look inside to see that the cabling is safely out of harms way and is not stretched or pinched. Test USB port.
Reviews (0)
Thank you for making an effort to leave a reivew but to protect against spam we only accept reviews from verified owners. Please proceed to login using the same email address you used when ordering the product.
Customer Login
- There are no reviews yet.
FAQs
FAQs
Will this fit my Lift chair?
Yes, If the lift chair has 1 x actuator/motor and the same plug type it will fit. This is a universal remote.
How long can this handset reach?
The overall length of the cable is approximately 2050mm long. The cable cable be separated in two so it can be installed either as a full cable or 2 parts.
My remote has different name/numbers will it still work?
Check the plug, if the plug has the same shape and same pin configuration then it will work.
Does this have a USB Charger?
Yes it has a USB port located on the end of the remote.
I have a normal electric recliner chair will this fit?
Yes, this remote can be used instead of the switches on the arm, its suitable for recliner chairs, sofas and lift chairs.
Do I need an extension lead as well?
No
My handset has more than 2 buttons, will this remote work?
No, this remote is for 2 button remote versions only.