Limoss HC150+1-017 Controller 2 Button
$85.00
In stock
Limoss HC150+1‑017 (part no. 500421) is a genuine 2‑button handset for single‑motor electric recliners and lift chairs. Featuring a right‑angle 5‑pin DIN plug, coiled lead and soft‑touch body, it’s a simple plug‑and‑play swap for any chair originally fitted with an HC150‑series remote. Replace a worn or unresponsive controller in minutes—no tools, pairing or programming required. Universal 2‑Button Replacement Handset Compatible with most 5‑pin DIN recliners from popular brands. If your old handset reads HC150, HC152 or similar it will swap straight in—just match the 5‑pin plug and you’re ready to relax again. Need a different style or more buttons? Check our full range of 2‑button, USB‑charging and wireless handsets (click here) or talk to us for help identifying the correct replacement—our techs are just a call or chat away. read more
In stock
Description
Universal 2‑Button 5‑Pin DIN Recliner Handset – HC150 Series
Restore effortless control of your favourite chair with this genuine Limoss HC150+1‑017 remote. Two momentary “Up / Down” buttons send low‑voltage signals through the right‑angle 5‑pin DIN plug, driving any compatible single‑motor recline or lift mechanism. The ergonomic ABS housing sits neatly in your side pocket, while the coiled lead keeps tangles at bay. Simply disconnect the old handset, push in the new DIN plug until it clicks, and power‑up—job done in under three minutes.
Genuine Limoss German Quality & Durability
All Limoss HC15x remotes are just momentary switches—the “brains” sit in the actuator—so this HC150+1‑017 (500421) plugs straight in for any 2‑button HC150, 151, 152 or 153 handset with a right‑angle 5‑pin DIN (e.g. 500268, 500270, 500308, 500309, 500379, 500399). Same pin‑out, IP X6 splash‑proof housing and long‑life microswitches—factory reliability, no generic risks.
Need Help Finding the Right Remote?
Still unsure? Browse our full catalogue of recliner remote controls (click here) or send us a quick photo of your old handset and plug—our repair specialists will match it for you. Remember, we’re only a phone call, email or live‑chat away.
'You Can Do It' – Quick DIY Swap in Under 3 Minutes
Power the chair off, unplug the old 5‑pin DIN connector, plug the new handset in, power on—job done! Enjoy the satisfaction of a quick fix and the savings of skipping a service call. As always, our step‑by‑step video tutorial and printable guide are there to walk you through the process, so you can feel confident doing it yourself and saving $$$
Technical Specifications
Technical Specifications
Make – Limoss.
Model Type – HC150+017
Model Number – 500421.
Cable Length – Approximately 1810mm and is part coiled and part straight.
Plug Type – 90°, 5 pin male din.
How To
How To
Power Off First.
Switch the chair off at the wall and unplug the transformer – safety first.
Find the Right‑Angle (90°) DIN Plug.
Trace the handset’s coiled lead to the control box under the chair; you’ll see the 5‑pin plug sitting at a neat right‑angle.
Unplug & Remove the Old Handset.
Press the retaining clip, pull the plug straight out, then slide the cable and handset clear of the arm pocket.
Plug In the New Handset.
Align the notch, push the new 90° DIN plug firmly home until it clicks.
Restore Power.
Reconnect the transformer and flick the wall switch back on.
Test Every Function.
Run each of the six buttons through a full cycle – back, foot and lift – to confirm smooth operation.
Job Done – Happy Reclining!
Stow the handset in the arm pocket, sit back, and enjoy that factory‑fresh control. DIY savings and satisfaction in one quick fix!
Compatible Models
Compatible Models
HC150
HC151
HC152
HC153
500268
500270
500308
500309
500379
500399
Reviews (0)
Thank you for making an effort to leave a reivew but to protect against spam we only accept reviews from verified owners. Please proceed to login using the same email address you used when ordering the product.
Customer Login
- There are no reviews yet.
FAQs
FAQs
Will this fit my Lift chair?
Yes, If the lift chair has 1 x actuator/motor and the same plug type it will fit. This is a universal remote.
How long can this handset reach?
The overall length of the cable is approximately 1810 mm long.
Do I need an extension lead as well?
No.
Will this remote work with my chair?
If your current handset is a 2‑button Limoss model with a right‑angle 5‑pin DIN plug and carries an HC150, HC151, HC152 or HC153 code (or part numbers like 500268, 500270, 500308, 500309, 500379 or 500399), this remote is a plug‑and‑play swap.
Is this handset covered by a warranty?
Yes—12 months against manufacturing defects. If it fails under normal use, contact us with your order number and we’ll arrange a replacement.
Who makes this remote controller?
This is made by Limoss who are a reputable manufacturer of recliner electronics.
My handset has more than 2 buttons, will this remote work?
No, this remote is for 2 button remote versions only.
