Mulin ARU65-D-HCL-NS-085SL-4-01 Switch
$50.00
In stock
Genuine replacement Mulin Electric ARU65-D0HCL-NS-05SL-4-01 four-button arm-panel switch restores fingertip control to your powered recliner or sofa. The sleek pewter faceplate presents paired footrest and headrest buttons plus a handy 5 V USB-A charging port, and the pre-wired 5-pin lead makes installation a five-minute DIY job. 4 Button Recliner Arm Switch with USB Charger. Built on the industry-standard 5-pin DIN plug, this module suits most powered recliners from Amart, Harvey Norman, Synargy, Nick Scali and more, replacing any ARU65-series four-button switch with integrated USB. Looking for another style or plug? We stock all the popular recliner switches (click here). If you are still not sure which replacement power recliner chair or sofa switch is right for you please contact our helpful team. read more
In stock
- Description
- Technical Specifications
- How To Tutorial
- Reviews (0)
- FAQs
- Add a review
Description
4-Button USB Recliner Arm Switch – Universal 5-Pin Replacement
Restore full fingertip control to your powered recliner or theatre lounge with this genuine Mulin Electric ARU65-D0HCL-NS-05SL-4-01 side-arm switch. The premium pewter faceplate houses four tactile buttons for independent footrest and headrest adjustment, plus a handy USB-A charging port to keep phones and tablets topped up while you relax. A pre-wired 5-pin DIN plug means you simply swap the old switch for this one and you’re back in action within minutes—no programming, pairing, or special tools required.
Mulin Recliner Switch Replacement with 5 Pin Din Plug
Before ordering, count the pins on the round DIN connector in your chair. This replacement is wired for the **standard 5-pin** ARU65 harness that most modern lounges use. It will not fit control boxes that take an 8-pin handset or dual plugs. If you are unsure, take a quick photo of your existing plug and send it through—our support team will confirm compatibility.
Need Help Finding the Right Replacement Switch?
We stock Australia’s largest range of electric recliner handsets and arm switches, from two-button toggles to eight-button multi-function panels. Browse our complete range of recliner toggle switches (click here), or contact us by phone, email or live chat for expert guidance from real furniture-repair technicians.
Save Time & Money and Do It Yourself
Replacing this switch is a straightforward five-minute DIY job: pop the trim bezel, undo two screws, unplug the old lead and click the new one in. Follow the step-by-step guide in the “How To Tutorial” tab or watch our video. Enjoy the satisfaction of fixing it yourself, keep repair costs down, and get back to relaxing in your favourite seat sooner.
Technical Specifications
Technical Specifications
Make – Jiangsu Mulin Intelligence Electric Co. LTD.
Model Number –ARU65-D-HCL-NS-085SL-4-01.
Function –Front 2 buttons operate footrest, rear 2 buttons operate the backrest and single front buton is the Home button.
Colour –Pewter.
Material –Plastic
Plugs –1 x Straight Din 5 pin plug with retaining prongs.
Dimensions –External fascia is Width 157mm, Depth 47mm. Thickness including housing and buttons is 42mm. Cable length is 860mm.
Power Rating-Input 29V, Output USB 5V 1A.
**All measurements are approximate.
How To Tutorial
How To Tutorial
- Unplug all power to the recliner and remove the mains plug from the wall socket.
- Lay down a drop sheet on the floor in front of the recliner chair.
- Unclip the plastic outer screw cover off to expose the 2 screws.
- Remove the screws and then pull out the switch casing to allow it to hang freely by its cable.
- Carefully turn the recliner over on its front side to gain access to the recliner wiring underneath.
- Locate where the original cabling currently fits and make notes of how it’s routed (recommended to take a photo).
- Cut and remove any cable ties holding the switch cables in place then unplug it from the actuator motor and light system.
- You should be able to remove fully the broken switch from the recliner.
- Feed the replacement switch through the outside arm plugs first until the switch housing is snug into the arm hole.
- Locate all plugs and connect to corresponding actuator and light system
- Secure any free cabling into the same position as the original using cable ties, be sure to check the cable is not caught up and not too tight or at risk of being trapped during motion.
- Carefully turn the recliner back over to the standing position.
- Angle the switch rotation first and then work on screwing in the 2 housing screws for the toggle switch.
- Put the plastic switch cover back on to hide the screws.
- Reconnect the power and switch it on.
- Test the replacement toggle switch by operating the recliner to its maximum opening and closed position. When fully open, look inside to see that the cabling is safely out of harms way and is not stretched or pinched.
- Test the USB charge port.
Reviews (0)
Thank you for making an effort to leave a reivew but to protect against spam we only accept reviews from verified owners. Please proceed to login using the same email address you used when ordering the product.
Customer Login
- There are no reviews yet.
FAQs
FAQs
Will this work my recliner?
This switch is suitable for electric recliners with a 2 motors, footrest, headrest or lumber, you will also need to check your actuator accepts a 1 x 5 pin round din plug.
Does the USB port charge my device?
Yes, the USB has a 5V 1A power rating this may limit the size of the device you wish to charge. A smartphone, iPad etc is okay however a laptop etc may be limited.
Will the switch suit left and right sides of the recliner?
Yes.
My switch looks the same will it still work?
The model number must be the same as ours ARU65-D-HCL-NS-085SL-4-01 for this to be compatible.
Is this switch easy to fit?
Yes, very simple and no experience is required. See our "How to " tab for detailed step by step instructions.
