Okin Deltadrive B15824 Actuator
$185.00
In stock
Genuine Okin Deltadrive B15824 linear actuator replacement for electric recliners and lift chairs. Links straight in with standard clevis rods and a right-angle 5-pin handset plug, delivering quiet 24 V DC power to the footrest or lift mechanism. Restore factory-smooth motion when your old motor stalls or clicks; the swap takes only minutes with a screwdriver and spanner. Genuine B15824 Replacement Actuator. Fits single-motor recliners from common brands. Matches label code B15824 and any 5-pin Okin Deltadrive of same stroke—no rewiring or re-programming, just plug and play. Need a different model or stroke length? See our full range of replacement recliner motor actuators (click here) covering all stroke lengths, plugs and load ratings. Unsure which unit fits? Phone, email or chat and our repair team will guide you. read more
In stock
- Description
- Technical Specifications
- How To
- Reviews (0)
- Add a review
Description
Genuine Okin B15824 “Deltadrive” Linear Actuator – Plug-and-Play Motor Replacement
Restore factory-smooth motion to your electric recliner or lift chair with this genuine Okin B15824 actuator. The unit runs on low-voltage 24 V DC, has a quiet worm-drive gearbox, and plugs directly into any standard Okin 5-pin handset harness positioned at a convenient 90 ° angle. Supplied ready to bolt in with standard clevis mounts, internal limit switches and an integrated lead, it’s the like-for-like swap when your original motor stalls, clicks or refuses to move. Expect the same stroke length, load rating and reliability the chair left the factory with—backed by Sofa Rehab’s 12-month warranty and expert support.
Is This the Right Actuator for Your Chair?
Check the silver label on your old motor: if the short part code reads B15824 and the plug is a round 5-pin DIN, this is the direct replacement—no rewiring, no programming. Not a match? Browse our full range of recliner motor actuators (click here) or contact us for help cross-referencing stroke length and load.
Quality OEM Spare Parts From Sofa Rehab
We believe in your right to repair, so we stock genuine OEM parts as well as affordable quality generics. Choosing the correct B15824 actuator means cable lengths, mounting eyelets and limit-switch positions all line up perfectly—no drilling, packing or guesswork. Every unit is checked in Brisbane before dispatch for plug-and-play confidence.
Save Time & Money and Do It Yourself
Disconnect power, remove two clevis pins, swap the actuator and push the 5-pin plug back together. No tools required and only ten minutes are all you need. Follow our step-by-step guide , then enjoy the satisfaction of fixing it yourself and saving $$$ on a service call.
Technical Specifications
Technical Specifications
| Model: | Deltadrive |
|---|---|
| Model Number: | B15824 |
| Power Rating: | 24V 2.2A Max 50W |
| Interuptime: | 0,5/4min |
How To
How To
- Unplug All Power
• Switch the chair off at the wall and disconnect the transformer so the system is completely de-energised.
• Wait 60 seconds for any stored charge to dissipate. - Position the Chair Safely
• Lay a thick blanket on the floor to protect fabric and flooring.
• Safe-lifting reminder: tip the chair onto its side using your legs, not your back. Keep your feet shoulder-width apart, bend your knees and hold the frame close to your body. If the chair is heavy, get a second person and lift together on the count of three. - Take “Before” Pictures
• Use your phone to photograph the old actuator’s mounting pins, cable routing and both plug connections.
• These reference photos make re-assembly fool-proof. - Release the Clevis Pins – No Tools Required
• Pull out the R-clips (or hitch pins, if fitted) at each end of the actuator.
• Slide the clevis pins free and keep them handy for re-use. - Remove the Old Actuator
• Support the mechanism with one hand while sliding the motor clear.
• Unplug the round 5-pin handset lead. - Install the New B15824
• Align the eyelets with the bracket holes, insert the clevis pins and re-fit the R-clips.
• Route the cable exactly as per your photos and push the 5-pin connectors together. - Return the Chair Upright – Safely
• Again, lift with your legs and keep the load close; work as a team if needed. - Power-Up & Function Test
• Reconnect the transformer, switch on at the wall and cycle the chair fully open and closed to confirm smooth travel with no cable pinch points. - Final Safety Check
• Visually verify that all pins are fully seated and R-clips secure.
• Tuck excess cable away from moving parts using cable ties if required. - Dispose of the Old Unit Responsibly
• Drop the worn actuator at your local e-waste recycling centre.
Reviews (0)
Thank you for making an effort to leave a reivew but to protect against spam we only accept reviews from verified owners. Please proceed to login using the same email address you used when ordering the product.
Customer Login
- There are no reviews yet.
