Bed Electrics, Handset Remotes
Okin Bed Remote JLDK.18.04.30
$109.00
In stock
Genuine Okin JLDK.18.04.30 wireless bed remote finished in silver and equipped with 18 back-lit keys for head, foot, massage and lighting control, plus Zero-Gravity, Flat and two memory presets. Powered by three AAA batteries (not Supplied) and pairs in seconds to most Okin JLDP-03 series control box, restoring full functionality to single or split-king adjustable bases without tools. Silver 18-Button Adjustable Bed Remote. Compatible with JLDP-03 control boxes found in Sleep Science, Sealy Ease, Puffy and other popular bases, this 2.4 GHz handset is the perfect DIY replacement when your original remote is lost, water-damaged or you simply want a spare. Need a Different Okin Handset? Browse our full range of adjustable bed remotes (click here) if this isn’t the exact model you need, or contact our support team for expert help identifying the right replacement. read more
In stock
Description
Silver 18-Button Wireless Adjustable Bed Remote – Okin JLDK.18.04.30
Restore full control to your adjustable or massage bed with this genuine Okin JLDK.18.04.30 handset. Finished in a stylish silver shell, the remote delivers smooth 2.4 GHz RF performance and an intuitive 18-button layout divided into three easy zones—Head & Foot positioning, Memory & Lighting, and Massage. Powered by three AAA batteries (not included), it pairs in seconds with any Okin JLDP-03 series control box, making it the perfect swap-in when your original remote is lost, water-damaged or the buttons have worn out.
- Head ▲ / ▼ & Foot ▲ / ▼ manual articulation
- Zero-Gravity & Flat one-touch comfort presets
- M1 / M2 Memory + under-bed LED Light
- Independent Head & Foot Massage with three time-outs and intensity up/down
- Split-King friendly multi-channel RF prevents cross-talk between two bases
To locate the handset remote controller part number for your bed look inside the battery compartment underneath the batteries. This controller has the code JLDK.18.04.30.
Compatible with JLDP-03 Control Boxes & Popular Bed Brands
This handset is factory-matched to Okin’s JLDP-03.x series receiver/control units—the electronics hidden under dozens of OEM bed bases sold by retailers such as Sleep Science, Sealy Ease V1.0, Puffy, and many private-label frames. Simply check the sticker on your control box or old remote: if it begins JLDP-03-… or JLDK.18.04.30 you’re in the right place. Looking for a different model? Browse our full catalogue of adjustable bed remotes (click here) or ask us for help.
Pairing Guide – Up & Running in 60 Seconds
- Unplug the bed from mains for 30 seconds, then reconnect—its receiver LED will start blinking.
- Press & hold Head ▲ + Foot ▲ on the remote until the keypad back-light flashes, then stops.
- Your bed should now respond. Repeat if the receiver LED times out before the remote is accepted.
That’s it—no tools, wiring or tech skills required.
Quality Genuine OEM Spare Parts from Sofa Rehab
Because this is an original Okin Refined Electric component, you get the exact moulding, PCB and firmware specified by the bed manufacturer—no cheap clones, no pairing headaches, and full peace of mind backed by our 12-month warranty. We ship fast from our Brisbane warehouse and every product page includes detailed specs so you can order with confidence.
‘You Can Do It’ – Replace Your Bed Remote Yourself & Save $$$
Why wait for a service call? Swapping a handset takes under a minute and only fresh AAA batteries (Not Supplied). Follow our quick pairing steps, enjoy the satisfaction of a job well done, and get back to relaxing sooner. DIY is easy with Sofa Rehab—Australia’s leading supplier of repair kits and quality spare
How To Pair & Install
How To Pair & Install
How to Pair & Install Your Okin JLDK.18.04.30 Remote
What You’ll Need
- 3 × fresh AAA batteries (alkaline recommended).
- Access to the power-point that supplies the bed base.
- 60 seconds of free time — no tools required!
Step-by-Step Pairing Procedure
- Insert the batteries.
Slide off the remote’s battery cover and fit three AAA cells, observing the “+ / –” markings. - Power-cycle the bed.
Unplug the bed’s mains lead for 30 seconds. (The receiver LED under the frame must go fully dark.) - Reconnect power.
Plug the bed back in. The receiver’s status LED will now blink rapidly, indicating pairing mode. - Send the pair code.
On the remote, press and hold Head ▲ + Foot ▲ together until the keypad back-light
flashes twice and then turns solid (≈ 3 – 5 s). - Confirm operation.
Release the buttons and test Head ▲ or Foot ▲. The bed should respond immediately.
If not, repeat steps 2–4 — the receiver times out after ~30 s.
Testing & Troubleshooting
- If nothing moves, double-check the control box model starts with JLDP-03- and the handset
label reads JLDK.18.04.30. - Weak or intermittent response? Try new alkaline batteries and keep the handset within 3 m
during pairing. - Running a split-king? Pair each remote to its own control box one side at a time to avoid
cross-linking. - Still stuck? Reach out to our support team — phone, chat or email — and we’ll walk you through it.
Technical Specifications
Technical Specifications
Technical Specifications – Okin JLDK.18.04.30 Handset
| Model / Part No. | Okin JLDK.18.04.30 (FCC ID PCU-JLDK-18-4) |
|---|---|
| Application | Wireless handset for adjustable & massage bed bases using Okin JLDP-03.x control boxes |
| Radio Protocol | 2.4 GHz ISM-band RF, GFSK modulation, output < 10 dBm, typical range ≈ 9 m (30 ft) open field |
| Power Source | 3 × AAA alkaline batteries (4.5 V DC nominal) – not supplied |
| Battery Life | 12 – 18 months typical nightly use (low-current keypad & RF design) |
| Keypad Layout | 18 tactile keys • Head ▲ / Head ▼ • Foot ▲ / Foot ▼ • Zero-Gravity / Flat • M1 / M2 memory + Lamp toggle • Head Massage ON, Foot Massage ON, Massage STOP • Intensity + / – • Timer 10 min / 20 min / 30 min |
| Pairing Method | Power-cycle control box –> LED blinks –> press & hold Head ▲ + Foot ▲ until handset back-light flashes |
| Housing / Finish | ABS enclosure, brushed-silver front & rear shells with blue LED back-light |
| Dimensions (L × W × H) | ≈ 165 × 56 × 22 mm (6.5 × 2.2 × 0.9 in.) |
| Weight | ≈ 120 g (4.2 oz) without batteries |
| Operating Temp. | 0 °C to +40 °C (indoor use, IP20) |
| Certifications | FCC Part 15, CE, RCM compliant |
Reviews (0)
Thank you for making an effort to leave a reivew but to protect against spam we only accept reviews from verified owners. Please proceed to login using the same email address you used when ordering the product.
Customer Login
- There are no reviews yet.
FAQs
FAQs
How do I pair the handset to my adjustable base?
Insert three fresh AAA batteries. Unplug the bed’s power cord for about 30 seconds, plug it back in, then press and hold Head ▲ + Foot ▲ on the remote. When the keypad back-light flashes twice, release the buttons—the bed should now respond.
Will this remote work with my model of bed?
Yes, provided the control box under your frame starts with JLDP-03-… or your old handset shows a part code beginning JLDK.18… (or FCC ID PCU-JLDK-18-4). If those labels don’t match, reach out to us before ordering and we’ll identify the correct replacement.
What batteries does it use, and how long will they last?
The remote runs on three standard AAA alkaline cells. With average nightly use you can expect 12–18 months of service before the low-battery indicator starts to dim.
Can I use two of these remotes on a split-king setup?
Absolutely. Pair each handset to the control box on its own side, one at a time. Okin’s multi-channel 2.4 GHz system prevents cross-talk, so each half of the bed will respond only to its designated remote.
Who makes this remote controller?
This is made by Okin who are a reputable manufacturer of recliner electronics.
The bed still won’t move after pairing—what should I check next?
First, confirm fresh batteries are installed in the correct polarity. Make sure you completed the pairing within 30 seconds of reconnecting power, and keep the remote within three metres of the receiver during the process. If the control box never enters pairing mode (its LED should blink), the power point or surge protector may be off, or the control box itself may need service—contact us and we’ll step you through further checks.
