4 Button Electric Lift Chair Remote
$75.00
In stock
Universal replacement 4 button lift chair controller, made by Okin Refined & also compatible with Kaidi handsets with model number KDH002-315. Each button is labelled and illuminates during operation. The 4 buttons control the footrest and backrest independently as this remote control is designed for lift chairs which have two actuator motors. The handset has an attached 1.7 meter long cable that plugs into a 5 pin DIN plug. 4 Button Lift Chair Remote - 5 Pin Plug. If your replacing a faulty controller then this is a easy plug-and-play replacement for any dual actuator lift chairs with this same 5 pin DIN plug. Not The Right Replacement Handset? We have a complete catalogue of replacement controllers (click here) for electric recliners, lift chairs and lounges. Ask us if you need assistance finding the right replacement. read more
In stock
- Description
- Technical Specifications
- How to
- Reviews (0)
- FAQs
- Add a review
Description
5 Pin Lift Chair Remote Controller
A replacement 5 pin lift chair remote, with 4 easy to use buttons. This electric recliner chair replacement remote controller comes ready to install and is designed to control two actuators which allows the footrest and backrest to open/close independently and to recline and lift/tilt.
Fits comfortably in your palm, clear and easy to push buttons and responsive smooth operation are just some of the benefits of installing a quality part from Sofa Rehab. Made by Okin for any lift and tilt recliner with two actuators.
Australia's Leading Supplier of Recliner Chair Spare Parts
We’re Australia’s Leading Supplier for Repair Kits and Spare Parts. Get the lowest prices on DIY repairs and if your a trades person who needs to buy in bulk, we also offer bulk buy discounts.
Save Time & Money and Do It Yourself
With our wide range of repair products, our easy step-by-step instructions and video tutorials, you’ve got everything you need to repair it yourself. Feel great about having done the repair yourself and saved $$$ on the repair.
Technical Specifications
Technical Specifications
Make – Okin Refined.
Model – 4 Button.
Cable Length – 1700 mm (approximately).
Plug Type – 5 pin din at 90 degrees.
How to
How to
- Unplug all power to the recliner and remove the mains plug from the wall socket.
- Lay down a drop sheet on the floor in front of the recliner chair.
- Carefully turn the recliner over on its front side to gain access to the recliner wiring underneath.
- Locate where the original cabling currently fits and make notes of how it’s routed (recommended to take a photo).
- Cut and remove any cable ties holding the cable in place then unplug it from the actuator motor.
- You should be able to remove fully the broken controller from the recliner.
- Feed the replacement controller through the outside arm.
- Secure any free cabling into the same position as the original using cable ties, be sure to check the cable is not caught up and not too tight or at risk of being trapped during motion.
- Carefully turn the recliner back over to the standing position.
- Test the replacement controller by operating the recliner to its maximum opening and closed position. When fully open, look inside to see that the cabling is safely out of harms way and is not stretched or pinched.
Reviews (0)
Thank you for making an effort to leave a reivew but to protect against spam we only accept reviews from verified owners. Please proceed to login using the same email address you used when ordering the product.
Customer Login
- There are no reviews yet.
FAQs
FAQs
Will this fit a Lift chair?
Yes, If the lift chair has 2 x actuator/motor and the same plug type it will fit. This is a universal remote.
How long can this handset reach?
The overall length of the cable is approximately 1700mm long.
My remote has different name/numbers will it still work?
Check the plug, if the plug has the same shape and same pin configuration then it will work.
Do I need an extension lead as well?
This remote has a generous length lead suitable for many applications. Check your required lead length against ours and this will tell you if you need it.
I have a normal electric recliner chair will this fit?
No. It is designed for electric recliner armchairs only.
My handset has only 2 buttons, will this remote work?
No, this remote is for 4 button remotes for chairs with 2 actuators only.
