Pride Chair Remote ELEASMB7120017
$179.00
In stock
Genuine Pride Mobility 2-button remote controller, model number ELEASMB7120017. Designed for use with Pride electric lift chairs and recliners, this replacement handset features an integrated USB charging port, back-lit buttons for ease of use, and a 5-pin plug connection. Supplied ready to install, simply plug it in and regain full control of your chair’s lift and recline functions. Pride Mobility Hand Control with USB Charging. This OEM handset suits a wide selection of Pride lift chairs and power recliners. With illuminated buttons and a handy USB port, it allows you to adjust your chair and charge devices at the same time. Need Help Finding the Right Remote? We stock a wide range of replacement recliner remotes (click here) for Pride and other brands. If you’re unsure which remote is right for your chair, contact us for assistance. read more
In stock
- Description
- Technical Specifications
- How To
- Reviews (0)
- FAQs
- Add a review
Description
Pride Mobility 2 Button Remote with USB – Model ELEASMB7120017
This genuine OEM Pride Mobility handset is the perfect replacement remote for your Pride electric recliner or lift chair. Designed with two large back-lit buttons, a handy USB charging port, and a 5-pin plug connection, it ensures smooth and reliable operation. The handset measures approximately 168mm long x 43mm wide x 30mm thick, and is supplied with a relaxed cable length of 1080mm (part straight, part coiled) for comfortable use.
Easy to Install Genuine OEM Spare Part
No complicated setup required — simply disconnect your old handset and plug this one in. Being a genuine Pride Mobility part, you can be confident of perfect compatibility and reliable performance. The illuminated buttons make it simple to use, even in dim light, while the USB port offers convenient device charging right at your chair.
Quick and Easy Replacement Process
Replacing your remote is straightforward thanks to the quick disconnect 5-pin plug. No special tools or technical experience are required — simply unplug the old unit and connect the new one. The ergonomic buttons and clear directional illustrations ensure ease of use.
Australia’s Leading Supplier of Recliner Spares
Sofa Rehab is Australia’s trusted source for both OEM and universal recliner spare parts. We stock a wide range of replacement remotes (click here) along with power supplies, actuators, and accessories to suit all popular brands.
'You Can Do It' – Quick DIY Swap in Under 3 Minutes
Replacing a handset takes under three minutes: 1, Unplug the transformer at the wall. 2, Unclip the in‑line connector hidden in the arm pocket or under the base. 3, Plug in your new remote, re‑latch the clip, restore power and test. No tools, no call‑out fees—just the satisfaction of a job well done.
Technical Specifications
Technical Specifications
Technical Specifications
| Brand | Pride Mobility |
|---|---|
| Model / Part No. | ELEASMB7120017 |
| Product Type | Lift chair / recliner hand control (remote controller) |
| Buttons | 2-button control (Lift / Recline) with back-lit buttons |
| USB Port | Integrated USB charging port on handset |
| Connector | 5-pin plug (round style) for compatible Pride systems |
| Handset Dimensions | Approx. 168 mm (L) × 43 mm (W) × 30 mm (T) |
| Cable Length | Approx. 1080 mm relaxed length (part coiled, part straight) |
| Installation | Plug-and-play replacement (no tools required) |
| Compatibility | Pride Mobility lift chairs and power recliners using a 5-pin hand control interface |
| Colour | White (face) and Grey (handset body) |
| What’s Included | 1 × Handset remote with attached cable |
Notes
- Verify your chair uses a 5-pin handset. This unit is not compatible with 8-pin systems.
- If you’re unsure about compatibility, contact our support team for assistance.
How To
How To
How To Install Your Pride Mobility Remote (ELEASMB7120017)
Safety first: Unplug the chair from mains power at the wall before you begin. Use safe lifting techniques (bend your knees, keep your back straight, lift with your legs) and get help to tip or move the chair. Keep fingers clear of moving linkages and scissor mechanisms.
Before You Start
- No tools are required for most chairs. Optional: a few cable ties and scissors for neat cable routing.
- Confirm your chair uses a 5-pin hand control interface. If you see 8 pins, this handset will not be compatible.
- Take a photo of the existing handset plug and cable routing under the chair. This is your reference for reassembly.
Step-by-Step Installation
- Disconnect power. Switch off at the power point and unplug the transformer from the wall. If your chair has a battery backup, disconnect it as well.
- Position the chair safely. With a second person, gently tip the chair onto its side or front so you can access the underside. Support it securely and keep hands clear of the mechanism.
- Locate the handset lead. Follow the current remote’s cable from the side pocket to the control box or junction under the seat. Refer to your photo for the path and anchor points.
- Release the old plug. Press the latch or locking tab on the handset connector and pull the 5-pin plug straight out. Do not twist the pins.
- Remove the old handset. Slide the handset out of its pocket or holster. If there is a clip, gently unclip it.
- Route the new cable. Feed the new ELEASMB7120017 cable along the same path as the original (part straight, part coiled). Avoid sharp edges and moving linkages. Leave a small service loop near the pocket so the cord is not tight during use.
- Connect the 5-pin plug. Align the keyway and push the new plug firmly into the controller socket until it clicks. Do not force it. Check that no pins are bent.
- Secure the lead. Use the existing clips or a couple of light cable ties to keep the lead tidy and away from the mechanism. Do not overtighten ties on the coiled section.
- Return the chair upright. With safe lifting technique and assistance, gently set the chair back to its normal position.
- Restore power and test. Plug the transformer back into the wall and switch on. Test Lift and Recline. Check the handset back-lighting and the USB charging port with a phone or small device.
Reviews (0)
Thank you for making an effort to leave a reivew but to protect against spam we only accept reviews from verified owners. Please proceed to login using the same email address you used when ordering the product.
Customer Login
- There are no reviews yet.
FAQs
FAQs
How do I know if this remote will fit my chair?
Check that your chair uses a 5-pin hand control and that your original remote is labelled ELEASMB7120017 (or matches the same 5-pin layout). If you’re unsure, take a photo of your plug and control box label and contact us for confirmation.
Is installation DIY? What should I prepare?
Yes, it’s plug-and-play. Unplug the chair from the wall first. Use safe lifting techniques (bend your knees, keep your back straight, lift with your legs) and get help to tip the chair if needed. Take a photo of the existing cable routing before removal, then swap the plugs and route the new lead the same way.
Will the USB port charge my phone or tablet?
The integrated USB port is intended for light device charging such as phones and small accessories. Charge speed depends on your device. It is not a data port and requires the chair to be powered.
Is the cable long enough for my setup?
The relaxed cable length is approximately 1080 mm (part straight, part coiled), which suits most recliner pockets and routing paths. Leave a small service loop so the cord is not tight during use and secure it away from moving parts.
What if I’m still not sure this is the right remote?
We stock a wide range of replacement recliner remotes . Contact us with your chair’s model or serial number and we’ll help confirm the correct part for you.
Do I need any tools or an electrician to fit it?
No. This is a DIY instal simply plug and play.
