Electric Recliner Spare Parts, Recliner Button Switches
eMoMo RemoP10LRA Round 2 Button Switch with USB
$48.00
In stock
A genuine replacement eMoMo electric recliner chair switch. A round 2 button power recliner switch with USB charging port and modern blue LED backlit buttons. Suitable for electric recliner chairs and sofas. Only compatible with model number RemoP10LRA and serial number starting with EP10LRA. 2 Button Electric Recliner Switch with USB. eMoMo Tech round 2 button power recliner switch used to operate the footrest of electric recliners and complete with a handy USB charging port. Not the Switch Your Looking For? We stock replacements for all popular electric recliner & sofa brands and models, see our full range of recliner toggle switches (click here) for a suitable replacement. Ask us if you need help choosing. read more
- Description
- Technical Specifications
- How to
- Reviews (0)
- FAQs
- Add a review
Description
Power Recliner Switch Replacements
Commonly fitted to the outer arm of power recliners and having a removable screw cover, it allows for an aesthetically pleasing design and offers a discreet appearance. Our sleek, robust and compact eMoMo 2 button round black plastic two button switch with USB charging port also has a modern blue LED backlit feature.
eMoMo Tech 2 Button Toggle Switch for Electric Recliners & Sofas
Model Number is RemoP10LRA and the serial number located on the control box begins with SN:EP10LRA and has a A-B switch also located on the control box. This electric recliner 2 button toggle switch is compatible with many different brands of power recliners.
We're Australia's Leading Supplier of Recliner Chair Spare Parts
We’re Australia’s leading supplier for repair kits and spare parts. Get the lowest prices on DIY repairs and if your a trades person who needs to buy in bulk, we also offer bulk buy discounts.
Save Time & Money and Do It Yourself
With our wide range of repair products, our easy step-by-step instructions and video tutorials, you’ve got everything you need to repair it yourself. Feel great about having done the repair yourself and saved $$$ on the repair.
Technical Specifications
Technical Specifications
Make – eMoMo Tech.
Model – RemoP10LRA (MUST HAVE THE SERIAL NUMBER STARTING SN:EP10LRA)
Power Rating – input 29V 2A and Output 5V 2.1A
Function – Front button up and rear button down.
Colour – Black with blue LED backlit buttons
Material – Plastic
Plug – 90 degree 5 pin din plug.
Dimensions – With facia installed- 67 mm Round, 33 mm thick. Cable length 2100 mm including the plug (approximately).
Required hole size – 44mm round
How to
How to
- Unplug all power to the recliner and remove the mains plug from the wall socket.
- Lay down a drop sheet on the floor in front of the recliner chair.
- Twist the plastic outer screw cover off to expose the 4 screws.
- Remove the screws and then pull out the switch casing to allow it to hand freely by its cable.
- Carefully turn the recliner over on its front side to gain access to the recliner wiring underneath.
- Locate where the original cabling currently fits and make notes of how it’s routed (recommended to take a photo).
- Cut and remove any cable ties holding the switch in place then unplug it from the actuator motor.
- You should be able to remove fully the broken switch from the recliner.
- Feed the replacement switch through the outside arm plug first until the switch housing is snug into the arm hole.
- Secure any free cabling into the same position as the original using cable ties, be sure to check the cable is not caught up and not too tight or at risk of being trapped during motion.
- Carefully turn the recliner back over to the standing position.
- Angle the switch rotation first and then work on screwing in the 4 housing screws for the toggle switch.
- Put the plastic switch cover back on to hide the screws.
- Reconnect the power and switch it on.
- Test the replacement toggle switch by operating the recliner to its maximum opening and closed position. When fully open, look inside to see that the cabling is safely out of harms way and is not stretched or pinched.
Reviews (0)
Thank you for making an effort to leave a reivew but to protect against spam we only accept reviews from verified owners. Please proceed to login using the same email address you used when ordering the product.
Customer Login
- There are no reviews yet.
FAQs
FAQs
Will this work my recliner?
This switch is suitable for electric recliners with a single footrest motors, you will also need to check your actuator accepts a 5 pin round din plug.
Does the USB port charge my device?
Yes, the USB has a 5V 2A power rating this may limit the size of the device you wish to charge. A smartphone, Ipad etc is okay however a laptop etc may be limited.
Will the switch suit left and right sides of the recliner?
Yes, you may need to rotate the switch 180 degrees to ensure the buttons are the correct way round. I.E front button to open and rear button to close etc.
My switch looks the same will it still work?
The model number must be the same as ours and the serial number must start with EP10LRA for this to be compatible.
Is this switch easy to fit ?
Yes, very simple and no experience is required. See our "How to " tab for detailed step by step instructions. We even supply the screws.
