Electric Recliner Spare Parts, Seat Mounted Buttons
Okin JLDK.08.03.07 Touch Sensor Kit
$109.99
In stock
Genuine DewertOkin JLDK.08.03.07 touch sensor kit for operating two powered functions on an electric recliner chair or sofa. This complete kit includes the control box, two concealed mounting plates and 4 chrome touch sensors and all connecting cables and plugs. 4 Button Dual Actuator Recliner Touch Switch Two sensor pairs independently operate the footrest and either a powered headrest or backrest depending on the furniture configuration. Need a Different Recliner Switch or Control System? See our wide range of replacement recliner seat mounted switches (click here) or contact us if you need help choosing the right match for your recliner. read more
In stock
- Description
- Technical Specifications
- How To Tutorial
- Reviews (0)
- FAQs
- Add a review
Description
Okin JLDK.08.03.07 Four Button Touch Sensor Kit
The genuine DewertOkin JLDK.08.03.07 is a complete touch sensor kit designed to operate two actuators in an electric recliner chair or sofa. Depending on the furniture configuration, these may control the footrest and powered headrest or the footrest and powered backrest. Each actuator is operated by its own pair of touch sensors, giving four independent chrome buttons that create a discreet, streamlined finish when installed through the upholstery .
This complete kit includes 4x 14mm round metal touch sensors (with threaded shafts), wiring leads, and the JLDK.08.03.07 control box. It is designed to operate a dual actuator recliner with simple up and down functionality. The system connects via standard 5 pin DIN plug, making it compatible with many common recliner power setups.
Complete Kit with Control Box and Standard Connections
This is a full replacement system, not just the sensors. The included JLDK.08.03.07 control box acts as the central hub, connecting the touch sensors to the actuator.
The touch sensor kit features:
- 4x chrome touch sensors
- 1x male 5 pin 90 degree plug
This standard configuration is commonly used across many electric recliner brands and models, making it a versatile replacement option when the model number and plug types match.
Quality Spare Parts from Sofa Rehab
Sofa Rehab are Australia’s leading supplier of recliner spare parts and leather repair kits. We only stock quality genuine and compatible replacement parts to help you keep your furniture working for years to come. Contact our team if you need help identifying the right replacement switch for your recliner.
Simple, DIY-Friendly Installation
You don’t need to be an electrician to replace this part. With only basic upholstery tools, the installation can be completed in a short time. The kit’s plug-and-play connectors and threaded sensor shafts make it easy for anyone to fit.
We provide detailed step-by-step guides and video tutorials to help you through the process — you can do it yourself and save on costly professional repair services.
Technical Specifications
Technical Specifications
Technical Specifications
| Manufacturer | DewertOkin Technology Group Co., Ltd. |
| Model Number | JLDK.08.03.07 |
| Part Number | JLDK08 |
| Version | 1.0 |
| Electrical Rating | DC 29V, 2A |
| Application | Dual-actuator electric recliner chairs and sofas |
| Functions | Operates two powered functions, typically the footrest and either the powered headrest or backrest, depending on the furniture |
| Number of Touch Sensors | 4 sensors arranged as 2 independent pairs |
| Sensor Finish | Chrome with no printed function symbols |
| Sensor Face Size | 14mm diameter × 2mm thick |
| Sensor Thread Length | 22mm |
| Required Mounting-Hole Size | 3.5mm diameter |
| Mounting Plates | 2 concealed mounting plates, one for each sensor pair |
| Mounting-Plate Dimensions | 80mm long × 20mm wide × 12.5mm thick each |
| Control-Box Dimensions | 105mm long × 38mm wide × 24mm deep |
| Main Cable Length | 840mm, including the plug |
| Sensor-Lead Length | 1250mm from the control box to the end of the mounting plates |
| Plug Type | Right-angled male 5-pin DIN plug |
| Identification Marker | One sensor lead has a red marker to distinguish the two control sets |
| Kit Includes | 1 control box, 2 sensor mounting plates, 4 screw-in chrome touch sensors and all attached wiring |
| Compatibility Check | Compare the model number, four-sensor configuration, wiring layout and right-angled 5-pin DIN plug before ordering |
How To Tutorial
How To Tutorial
How to Fit the JLDK.08.03.07 Touch Sensor Kit into a Seat Cushion Side Wall
These instructions explain how to replace an existing JLDK.08.03.07 touch sensor kit fitted through the upholstered side wall of a recliner seat cushion. Use the existing sensor positions and mounting holes wherever possible.
Removal and Installation Instructions
- Disconnect the power. Unplug the recliner from the wall socket and disconnect any battery backup before working on the electrical system.
- Access the inside of the seat cushion side wall. Carefully open or release the underside dust cover or upholstery access area so you can reach the control box, sensor mounting plates and wiring.
- Record the original arrangement. Take clear photographs showing the position of both sensor pairs, the red-marked lead, control-box location, cable routing and 5-pin connection before disconnecting anything.
- Disconnect the original control. Follow the main cable to its connection point, release any retaining clip if fitted and gently unplug the 5-pin DIN connector by holding the plug body rather than pulling the cable.
- Remove the original touch sensors. Support each mounting plate behind the seat cushion side wall while carefully unscrewing the chrome sensors from the outside. Remove both mounting plates and release the old wiring from any clips or cable ties.
- Position the new mounting plates. Place each new two-sensor mounting plate behind the upholstered side wall, aligning its threaded sensor positions with the existing 3.5mm mounting holes. Position the red-marked sensor set in the same location as the original.
- Fit the four chrome sensors. From the outside of the seat cushion side wall, pass each threaded sensor stem through its existing hole and gently screw it into the mounting plate behind the upholstery.
- Tighten the sensors carefully. Hold each mounting plate straight and tighten the sensors evenly by hand until secure. Do not overtighten, crush the upholstery or use pliers on the chrome sensor faces.
- Install the control box and route the cables. Position the control box securely inside the furniture and follow the original cable path. Keep all wiring away from actuator movement, hinges, sharp frame edges and other pinch points.
- Connect the 5-pin plug. Align the pins correctly and push the right-angled male 5-pin DIN plug into its matching socket without twisting or forcing it. Refit any plug-retaining clip originally used by the furniture.
- Test both sensor pairs. Keep everyone and everything clear of the mechanism, reconnect the power and briefly test each sensor. Confirm that one pair operates the footrest and the second pair operates the powered headrest or backrest.
- Complete the installation. Disconnect the power again, make any final cable-routing adjustments and secure loose wiring. Refit the dust cover or upholstery access panel before reconnecting the recliner for normal use.
Reviews (0)
Thank you for making an effort to leave a reivew but to protect against spam we only accept reviews from verified owners. Please proceed to login using the same email address you used when ordering the product.
Customer Login
- There are no reviews yet.
FAQs
FAQs
Will the DewertOkin JLDK.08.03.07 touch sensor kit fit my electric recliner?
This kit is suitable for dual-actuator electric recliners using the same four-sensor configuration and right-angled male 5-pin DIN plug. Before ordering, compare the JLDK.08.03.07 or JLDK08 number, plug, sensor layout and wiring with your original control. Contact Sofa Rehab with photographs if you need help confirming compatibility.
What does the JLDK.08.03.07 recliner touch sensor control?
The JLDK.08.03.07 independently controls two recliner actuators using two pairs of touch sensors. One pair usually operates the footrest, while the second may operate a powered headrest or powered backrest, depending on how the furniture was manufactured.
What is included with the DewertOkin four-button touch sensor kit?
The complete kit includes one DC 29V control box, two concealed sensor mounting plates, four round chrome screw-in touch sensors and all attached wiring. It also has a right-angled male 5-pin DIN plug. Separate mounting washers are not included or required for the sensors to screw into the supplied plates.
What is the difference between JLDK.08.03.07 and JLDK.08.03.00?
What is the difference between JLDK.08.03.07 and JLDK.08.03.00?
Can I replace the JLDK.08.03.07 recliner switch myself?
The kit is designed as a replacement for an existing matching system and can generally be fitted using the original sensor holes and cable route. Disconnect all power first, photograph the original arrangement and keep the wiring clear of moving parts. Follow Sofa Rehab’s installation instructions or contact our team if the original configuration differs.
