HHC HSW306 Remote Lumber Version
$154.00
In stock
This HHC HSW306 6 button remote suits electric recliners and lift chairs with 3 motor systems. This version has the bottom two buttons controlling the lumber, so it is important to match your existing remote’s button layout. Features a 7 pin DIN plug, USB charging port and backlit buttons for easy everyday use. 6 Button Recliner Remote with backrest Control (7 Pin Plug). Bottom two buttons operate the lumber function. Suits 3 motor recliners with a 7 pin connection. Check your current remote matches this layout before ordering. Need the Lumber Version Instead? We also sell a similar remote where the bottom buttons control the lumber. Browse our 6 button recliner remotes (click here) or contact us for help choosing the right one. read more
In stock
- Description
- Technical Specifications
- How To
- Reviews (0)
- FAQs
- Add a review
Description
HSW306 Recliner Remote 6 Button with Lumber Function
This HHC HSW306 remote controller is designed for electric recliners and lift chairs with 3 motor systems. It provides independent control of headrest, recline and lumber functions. This version features a 7 pin DIN plug, backlit buttons for low light use, and a built-in USB charging port for added convenience.
Features Include USB port, part straight and part coiled cable 1000mm (approximately) total length and straight 7 pin din plug.
6 Button Layout Details
This model is specifically configured with the following button functions:
Top buttons: Headrest
Middle buttons: Recline (open/close footrest and backrest)
Bottom buttons: Lumber
It is important to match this layout with your existing remote before ordering, as similar looking remotes may have different button functions.
Also Available – Lumber Button Version
We also stock a visually identical 6 button remote where the bottom two buttons control the backrest instead of lumber.
If your current remote uses the bottom buttons for backrest movement, then you will need that version instead.
View the alternative model here (click here)
If you’re unsure which version you need, contact us and we can help you identify the correct replacement.
Australia's Leading Supplier of Recliner Chair Spare Parts
We’re Australia’s Leading Supplier for Repair Kits and Spare Parts. Get the lowest prices on DIY repairs and if your a trades person who needs to buy in bulk, we also offer bulk buy discounts
Save Time & Money and Do It Yourself
Replacing your recliner remote is simple and takes just a few minutes. Unplug the old handset and connect the new one, no tools or experience required.
With our helpful support and DIY guidance, you can complete the replacement yourself, save money, and enjoy the satisfaction of getting your recliner working again.
Technical Specifications
Technical Specifications
| Make | HHC |
|---|---|
| Model | HSW306 |
| Product Type | Electric recliner remote controller handset |
| Button Quantity | 6 buttons |
| Button Functions | Top buttons control headrest, middle buttons control recliner open/close, bottom buttons control lumber |
| Plug Type | Straight 7 pin DIN plug |
| Cable Length | 1000mm (approximately), straight cable (extension cable not supplied) |
| Handset Dimensions | 150 x 42 x 27mm (approximate, measured end to end and centre) |
| USB Output | 5V 2A |
| Button Lighting | Backlit buttons |
| Suitable For | Electric recliners and lift chairs with 3 motor systems using a 7 pin connection and matching button layout |
| Compatibility Note | This model has the bottom two buttons operating the lumber. Must match your existing remote’s function layout. |
How To
How To
How To Install Your Recliner Remote Controller
Replacing your recliner remote is quick and easy. No technical experience is required and the process can be completed in just a few minutes.
- Disconnect Power
Unplug your recliner from the wall power outlet before starting for safety. - Locate the Existing Remote Connection
Follow the cable from your current remote to where it connects into the chair’s motor or control box. - Disconnect the Old Remote
Carefully unplug the existing remote. If there is a retaining clip, gently press or release it before pulling the plug apart. - Connect the New Remote
Align the 7 pin plug correctly and push it firmly into the socket until it is fully seated. Do not force the connection. - Restore Power and Test
Plug the recliner back into the power outlet and test all buttons to ensure each function operates correctly.
Important: Make sure the button layout matches your original remote before installation. This model has the bottom two buttons controlling the backrest.
If you’re unsure about compatibility or installation, feel free to contact our team for assistance.
Reviews (0)
Thank you for making an effort to leave a reivew but to protect against spam we only accept reviews from verified owners. Please proceed to login using the same email address you used when ordering the product.
Customer Login
- There are no reviews yet.
FAQs
FAQs
How do I know if this is the correct remote for my recliner?
You need to match both the plug type and button layout. This remote uses a 7 pin plug and has the bottom two buttons controlling the backrest. If your current remote matches this configuration, then this is the correct replacement.
What happens if my bottom buttons control the backrest nstead?
Then you will need the alternative version. We also sell a visually identical remote where the bottom buttons control the backrest instead of lumber. Check your current remote carefully before ordering.
Will this remote work with all electric recliners?
No, this is not a universal remote. It is only compatible with recliners that use a 7 pin plug and have the same 6 button function layout for headrest, recline and lumber.
Is it difficult to install this remote?
No, installation is very simple. Just unplug your old remote and plug this one in. No tools or experience required, and it usually takes only a few minutes.
Do I need an extension lead as well?
Depends on the furniture set up. We sell the remote that links into an extension lead but we do not stock or sell the extension lead.
