Electric Recliner Spare Parts, Recliner Button Switches
JLDK.15.08.72 Okin 5 Button Recliner Switch with USB
$70.00
A genuine replacement Okin Refined JLDK.15.08.72 recliner 5 button switch. A dark grey gloss coloured rectangle 5 button electric recliner switch with USB charging port. Universal power recliner switch suitable for power recliner chairs and sofas with dual actuators. The switch can only be fitted on the left side when seated. Model number JLDK.15.08.11A will be supplied. 5 Button Power Recliner Switch with USB. 5 Button recliner switch used to operate two actuators. Complete with USB charge port. Not the Switch Your Looking For? We stock all the popular recliner switches (click here). If you are still not sure which replacement power recliner chair or sofa switch is right for you please contact our helpful team. read more
- Description
- Technical Specifications
- How to
- Reviews (0)
- FAQs
- Add a review
Description
Okin 5 Button Recliner Switch with USB
Commonly fitted to the outer arm of electric recliner chairs and sofas having a dark grey gloss finish, it allows for an aesthetically pleasing design and offers a modern quality appearance. Our sleek, robust rectangle 5 button power recliner switch with USB charging port fits most recliner chairs and sofas needing to operate a dual motor mechanisms on the market today.
Okin Refined Recliner Switch Replacement
Model number JLDK.15.08.72. This version of power recliner switch is fitted to the left hand side of the recliner when your sat in the furniture and designed to operate a footrest and headrest actuator of chairs, sofas and theatre lounges.
Okin Refined Recliner Switch Same Function Different Number!
Please note if you purchase the model number JLDK.15.08.72 we will supply the JLDK.15.08.11A version as these two switches are interchangeable and have the exact same functions.
We're Australia's Leading Supplier of Recliner Chair Spare Parts
We’re Australia’s leading supplier for repair kits and spare parts. Get the lowest prices on DIY repairs and if your a trades person who needs to buy in bulk, we also offer bulk buy discounts.
Save Time & Money and Do It Yourself
Easy fitting in under 15 minutes with no experience required. The only tool required is a screwdriver.
Technical Specifications
Technical Specifications
Make – Okin Refined.
Model –JLDK.15.08.11A. Compatible with JLDK.15.08.72
Function –Front 2 buttons open/close the footrest and the rear 2 buttons open/close the headrest. Centre button is the ‘Home’ button (All functions close together)
Location –Install on Left side when seated.
Colour –Dark Grey gloss finish.
Material –Plastic housing and fascia.
Plug –Straight 5 pin din plug.
Dimensions – External fascia is Width 100 mm, Height 36 mm. Thickness including housing and buttons is 38 mm. Cable length is 1900 mm (Approximately)
Power Rating- Switch – DC 29V 2A and USB -5V 2A.
How to
How to
- Unplug all power to the recliner and remove the mains plug from the wall socket.
- Lay down a drop sheet on the floor in front of the recliner chair.
- Unclip the metal outer screw cover off to expose the 2 screws.
- Remove the screws and then pull out the switch casing to allow it to hand freely by its cable.
- Carefully turn the recliner over on its front side to gain access to the recliner wiring underneath.
- Locate where the original cabling currently fits and make notes of how it’s routed (recommended to take a photo).
- Cut and remove any cable ties holding the switch in place then unplug it from the actuator motor.
- You should be able to remove fully the broken switch from the recliner.
- Feed the replacement switch through the outside arm plug first until the switch housing is snug into the arm hole.
- Connect plugs securely to corresponding plugs.
- Secure any free cabling into the same position as the original using cable ties, be sure to check the cable is not caught up and not too tight or at risk of being trapped during motion.
- Carefully turn the recliner back over to the standing position.
- Angle the switch rotation first and then work on screwing in the 2 housing screws for the toggle switch.
- Put the metal switch cover back on to hide the screws.
- Reconnect the power and switch it on.
- Test the replacement toggle switch by operating the recliner to its maximum opening and closed position. When fully open, look inside to see that the cabling is safely out of harms way and is not stretched or pinched.
- Test the USB charge port.
Reviews (0)
Thank you for making an effort to leave a reivew but to protect against spam we only accept reviews from verified owners. Please proceed to login using the same email address you used when ordering the product.
Customer Login
- There are no reviews yet.
FAQs
FAQs
Will this work my recliner?
This switch is suitable for electric recliners with a dual actuators/motors only and fits to either side of the recliner. You will also need to check your actuator accepts a 5 pin round din plug.
Does the USB port charge my device?
Yes, the USB has a 5V 2A power rating this may limit the size of the device you wish to charge. A smartphone, Ipad etc is okay however a laptop etc may be limited.
Will the switch suit left and right sides of the recliner?
No this is only suitable for the Left Hand side when sat on the furniture
My switch looks the same will it still work?
The model numbers must be either JLDK.15.08.72 or JLDK.15.08.11A to work.
Is this switch easy to fit ?
Yes, very simple and no experience is required. See our "How to " tab for detailed step by step instructions. We even supply the screws.
