Handset Remotes, Junction Boxes, La Z Boy Spare Parts, Leads/Plugs, Lift Chair Kit
La Z Boy Platinum Plus Lift Chair 3 Piece Set
$430.00
La Z Boy 55TH Platinum Plus lift chair 3 piece replacement control kit. Everything needed to fix remote control, control module or damaged cables issues. Only suitable for Platinum Plus lift chairs from La Z Boy. Fitting this 3 piece set will repair common handheld remote control faults. Platinum La Z Boy Recliners. Logicdata Liberty system control full kit. La Z Boy Platinum Lift chair Range. Sofa Rehab are the recommended supplier of this genuine replacement 3 piece set so you can be assured of quality and compatibility in the replacement for your La z Boy electric recliner spare parts. . read more
- Description
- Technical Specifications
- How To Tutorial
- Reviews (0)
- FAQs
- Add a review
Description
La z Boy Platinum Plus Repair Kit
This genuine replacement La Z Boy Platinum Plus repair kit includes all 3 common parts required to resolve ‘no response’ faults on the handheld remote control. If your Platinum Plus lift chair is not functioning due to either a handset, cable or control module failure then this is the 3 piece repair kit to get, this ensures you can fix the issue fast.
This 3 piece Liberty System & La Z Boy Platinum Plus set is not compatible with the La Z Boy Platinum chair range with heat and massage functions.
Australia's Leading Supplier of Recliner Chair Spare Parts
We’re Australia’s Leading Supplier for Repair Kits and Spare Parts. Get the lowest prices on DIY repairs and if your a trades person who needs to buy in bulk, we also offer bulk buy discounts.
Save Time & Money and Do It Yourself
With our wide range of repair products, our easy step-by-step instructions and video tutorials, you’ve got everything you need to repair it yourself. Feel great about having done the repair yourself and saved $$$ on the repair.
Technical Specifications
Technical Specifications
HANDSET/REMOTE CONTROL
Make – Logicdata Liberty System.
Brand – La Z Boy.
Model – Platinum Plus 55TH.
Model Type – HSC-LAZ-P10LCPLUS.
LZB PN – 10.000089.
MASTER CONTROL MODULE
Make – Logicdata Liberty System.
Type – Liberty control-4M3-LAZ.
La Z Boy P/N – 10.000104.
Revision – 7/1.2.0.
Input – 29V 8A.
Output Move – 29V 3.2A.
Output Oscillating mode – 29V 1A.
Duty Cycle – Move 2min on/18min off and Oscillating mode 30 min 0n/30min off.
LA Z BOY TRANSFORMER EXTENSION CABLE 10.000103
Make – Logicdata Liberty System.
Model number – LOG-CBL-LAZ-BUNDLE-PLUS Rev5 10.000103.
La Z Boy P/N – 10.000103.
Revision – 3
Plug Ends – Male white 10 pin rectangle plug (only 5 slots used), Male Orange round 8 pin, Female black 10 pin rectangle plug (Only 5 slots used) and black 8 pin round Female din plug with retaining clasp, Female grey 3 pin round din plug with retaining clasp, Male grey 8 pin Din plug, Female blue 6 pin round din plug with retaining clasp and Male blue 8 pin round din plug.
How To Tutorial
How To Tutorial
- To start with we strongly suggest to photograph or make notes of all the plugs and cable positions on the chair so you can easily recall the positions if required.
- Switch off all power to the recliner at the wall socket, remove the mains plug from the wall socket and unplug transformer from the chair in this order.
- Lay down a drop sheet on the floor in front of the recliner chair.
- Disconnect the handset/remote from the connection located down between the lumber cushion and seat cushion at the rear of the seat, to do this lift the retaining clip and pull plug free and remove the handset/remote but DO NOT connect new handset/remote yet!.
- Next carefully turn the recliner over on its front side to gain access to the recliner wiring underneath.
- Locate the master control module near to the footrest and unplug all plugs and then unscrew the two mounting screws holding the module to the timber frame and remove the master control module.
- Install the new master control module using the original mounting screws but DO NOT install plugs yet!.
- Next start to remove the original transformer extension plastic plugs and we recommend to then install the replacement transformer extension lead plug for plug as you remove the original.
- Once the transformer extension cable is installed connect all the plugs except the handset/remote plug into corresponding colour-coded plugs and also into the master control module.
- At this point check all cables are safe and clear of obstructions and all plugs are secure.
- Carefully turn the recliner back over to the standing position,
- Locate the handset/remote plug at the rear of the seat and connect the replacement handset/remote and close the retaining clasp.
- Reconnect the power by firstly connecting the transformer to the chair, then connect the wall plug to the mains power supply and switch on.
- Test the chair functions by operating the recliner to its maximum opening and closed position. When fully open, look inside to see that the cabling is safely out of harms way and is not stretched or pinched.
Note it is expected the first time the chair is operated after this kit is installed that the functions will be in ‘Leaning mode’, the second time you test the functions they will work correctly
Reviews (0)
Thank you for making an effort to leave a reivew but to protect against spam we only accept reviews from verified owners. Please proceed to login using the same email address you used when ordering the product.
Customer Login
- There are no reviews yet.
FAQs
FAQs
Will This Fit My Chair?
For this to be compatible with your chair it will need to have the same part numbers and functions on the remote.
Is this easy to fit?
Yes, we provide step by step install instructions, follow these and it will work.
My chair has heat and massage functions will this work?
No. This kit is only suited to Platinum Plus lift chairs with the adjustable headrest and lumber mechanisms.
I don't need all 3 parts can I buy them individually?
Yes, we sell all 3 parts individually in our store.
Do you ship to USA or Canada?
Yes.