Mulin 6 Button Switch MLSK65-F1
$60.00
In stock
A genuine replacement Kaidi electric recliner switch. Model number MLSK65-F1. Sleek brushed metal coloured plastic oval 6 button electric recliner switch with USB charging port used to independently operate either the footrest, lumber/backrest or headrest actuators. Suitable for power recliner chairs and sofas with 2 motors and lights. Compatible with both left and right sided switches. Kaidi 6 Button Power Recliner Switch with USB. 6 Button recliner switch used to operate the footrest, lumber or headrest mechanisms independently complete with a USB charging port. Not the Switch Your Looking For? We stock all the popular recliner switches (click here). If you are still not sure which replacement power recliner chair or sofa switch is right for you please contact our helpful team. read more
In stock
- Description
- Technical Specifications
- How To Tutorial
- Reviews (0)
- FAQs
- Add a review
Description
Power Recliner 6 Button Switch Plus USB Port, Home and Light Button
Fitted to either the inner or outer arm of electric recliner chairs and sofas having a removable screw cover, it allows for an aesthetically pleasing design and offers a discreet appearance. Our sleek, robust and compact MLSK65-F1 oval 6 button power recliner switch with USB charging port fits most recliner chairs and sofas needing to operate two independent actuators and LED lights.
Mulin Recliner Switch Replacement
Model number MLSK65-F1 is supplied with a 5 pin male din plug and Hi-Fi 2 pin system plug and control box. This version of power recliner switch is commonly found on many brands including some A-mart Furniture and Harvey Norman lounges
We're Australia's Leading Supplier of Recliner Chair Spare Parts
We’re Australia’s leading supplier for repair kits and spare parts. Get the lowest prices on DIY repairs and if your a trades person who needs to buy in bulk, we also offer bulk buy discounts.
Save Time & Money and Do It Yourself
Easy fitting in under 15 minutes with no experience required. The only tool required is a screwdriver.
Technical Specifications
Technical Specifications
Make – Jiangsu Mulin Intelligence Electric Co. LTD.
Model Number –MLSK65-F1.
Function –Front 2 buttons operate blue button operates the lights and the rear silver button is the home button.
Colour –Brushed Silver.
Material –Plastic
Plugs –1 x Straight Din 5 pin plug with retaining prongs and 1 x female HI-FI 2 pin system plug with clasps.
Dimensions –External fascia is Width 158mm, Depth 48mm. Thickness including housing and buttons is 42mm. Cable length is 930mm including the control box and 5 pin din plug. The HI-FI 2 pin system plug cable is 350mm to the control box.
Power Rating-Input 29V, Output USB 5V 1A Other 12V 2A
Switch Surrounds Illuminates when switch buttons activated and turn off immediately when button released.
**All measurements are approximate.
How To Tutorial
How To Tutorial
- Unplug all power to the recliner and remove the mains plug from the wall socket.
- Lay down a drop sheet on the floor in front of the recliner chair.
- Unclip the plastic outer screw cover off to expose the 2 screws.
- Remove the screws and then pull out the switch casing to allow it to hang freely by its cable.
- Carefully turn the recliner over on its front side to gain access to the recliner wiring underneath.
- Locate where the original cabling currently fits and make notes of how it’s routed (recommended to take a photo).
- Cut and remove any cable ties holding the switch cables in place then unplug it from the actuator motor and light system.
- You should be able to remove fully the broken switch from the recliner.
- Feed the replacement switch through the outside arm plugs first until the switch housing is snug into the arm hole.
- Locate all plugs and connect to corresponding actuator and light system
- Secure any free cabling into the same position as the original using cable ties, be sure to check the cable is not caught up and not too tight or at risk of being trapped during motion.
- Carefully turn the recliner back over to the standing position.
- Angle the switch rotation first and then work on screwing in the 2 housing screws for the toggle switch.
- Put the plastic switch cover back on to hide the screws.
- Reconnect the power and switch it on.
- Test the replacement toggle switch by operating the recliner to its maximum opening and closed position. When fully open, look inside to see that the cabling is safely out of harms way and is not stretched or pinched.
- Test the USB charge port.
Reviews (0)
Thank you for making an effort to leave a reivew but to protect against spam we only accept reviews from verified owners. Please proceed to login using the same email address you used when ordering the product.
Customer Login
- There are no reviews yet.
FAQs
FAQs
Will this work my recliner?
This switch is suitable for electric recliners with a 2 motors, footrest, headrest or lumber, you will also need to check your actuator accepts a 1 x 5 pin round din plug and 1 x HI-FI 2 pin system plug for the lights.
Does the USB port charge my device?
Yes, the USB has a 5V 1A power rating this may limit the size of the device you wish to charge. A smartphone, iPad etc is okay however a laptop etc may be limited.
Will the switch suit left and right sides of the recliner?
Yes.
My switch looks the same will it still work?
The model number must be the same as ours MLSK65-F1 for this to be compatible.
Is this switch easy to fit?
Yes, very simple and no experience is required. See our "How to " tab for detailed step by step instructions.
