Okin JLDQ.11.156.333A Recliner Motor
$185.00
In stock
Genuine Okin Refined JLDQ.11.156.333A electric recliner actuator motor for compatible recliner chairs, sofas and lounges. This 24V 50W replacement actuator has a 156mm install length, 333mm stroke, built-in female 5 pin DIN socket for the handset or switch, and a short male 2 pin OI power lead. Okin Refined JLDQ.11.156.333A Actuator Motor. This model has the Dewert Okin housing code R5.114.00.002 and is supplied as the JLDQ.11.156.333A version. Please compare your original actuator label, fixing points, stroke, install length and plug connections before ordering. Looking for a Different Recliner Actuator? We stock a range of electric recliner actuator motors for popular recliner chairs, sofas and lounges. See our full range of recliner actuator motors (click here) or contact us if you need help finding the right replacement. read more
In stock
- Description
- Technical Specifications
- How To Tutorial
- Compatible Models
- Reviews (0)
- FAQs
- Add a review
Description
Okin Refined JLDQ.11.156.333A Replacement Recliner Actuator
A complete replacement Okin Refined linear actuator motor for compatible electric recliner chairs, powered sofas and lounge suites. This JLDQ.11.156.333A actuator is designed to drive the recliner mechanism open and closed when connected to a compatible 2 button handset or switch. Smooth and reliable operation are just some of the benefits of fitting a quality replacement part from Sofa Rehab.
This actuator has a 24V 50W power rating, 156mm install length and 333mm stroke. The approximate total length between the fixing points is 520mm. The actuator motor housing also has the code Dewert Okin R5.114.00.002.
Check Your Original Actuator Before Ordering
To confirm this is the correct replacement, compare it with your original recliner actuator before placing your order. The most important details to check are the fixing points, install length, stroke, power plug and handset connection.
This actuator is not suitable as a lift chair actuator. It is intended for compatible standard electric recliner chairs, sofas and powered lounge mechanisms.
Built-In 5 Pin DIN Socket and 2 Pin OI Power Lead
This actuator has a female 5 pin DIN socket built into the side profile of the plastic motor housing. This socket accepts compatible standard 5 pin DIN plugs used on many 2 button recliner remote controls and switches.
The power lead has a male 2 pin OI plug and is approximately 83mm long including the plug housing. On some compatible actuator models, the power lead may be a different length or located slightly differently, but this supplied JLDQ.11.156.333A actuator can still be a suitable replacement when the fixing points, operational dimensions and plug connections match.
Broken White Slider Block? Replace the Complete Actuator
The white actuator slider block on this model is not available as a separate spare part. If the slider block has cracked, broken or failed, the complete actuator motor is considered the correct replacement repair.
Replacing the full actuator also helps ensure the motor, housing, slider block and movement assembly are all working together as intended.
Australia's Most Trusted Supplier Of Electric Recliner Spare Parts
Trusted by the repair industry and DIY customers, Sofa Rehab is one of Australia’s leading suppliers of electric recliner spare parts, furniture repair products and leather care solutions. If you are unsure whether this actuator will suit your recliner, contact us before ordering and our team can help you compare your existing actuator model number, plug type, fixing points and operating dimensions.
Save Time & Money, Do It Yourself
Replacing a recliner actuator is a repair many customers can do themselves with basic tools and careful checking. Disconnect the power, compare the original actuator to the replacement, remove the fixing pins or bolts, then reconnect the power lead and 5 pin DIN handset or switch plug.
No specialist electrical work is required when replacing like for like plug-connected recliner parts. Take your time, check the actuator orientation before fitting, and enjoy the satisfaction of getting your recliner working again yourself.
Technical Specifications
Technical Specifications
Technical Specifications
| Specification | Details |
|---|---|
| Product Type | Electric recliner linear actuator motor |
| Make | Okin Refined |
| Model | JLDQ.11.156.333A |
| Housing Code | Dewert Okin R5.114.00.002 |
| Power Rating | 24V 50W |
| Duty Cycle | Max 1 minute on, 18 minutes off |
| Install Length | 156mm |
| Stroke Length | 333mm |
| Approximate Total Length | Approximately 520mm between fixing points |
| Handset/Switch Connection | Female 5 pin DIN socket built into the actuator motor housing |
| Power Connection | Male 2 pin OI plug |
| Power Lead Length | Approximately 83mm including the plug housing |
| Common Use | Standard electric recliner chairs, powered sofas and lounge suites |
| Lift Chair Suitability | Not suitable as a lift chair actuator |
| Slider Block Availability | The white actuator slider block is not available separately. Replace the complete actuator if the slider block is cracked or broken. |
How To Tutorial
How To Tutorial
How To Install Your Recliner Actuator
Replacing an electric recliner actuator is a DIY repair that many customers can complete with basic tools and careful preparation. Before starting, make sure the recliner is disconnected from power and positioned somewhere safe with enough room to work around it.
Important: Take a clear photo of the existing actuator, wiring, plug positions and mounting direction before removing anything. This gives you a helpful reference when fitting the new actuator and reconnecting the plugs.
Before You Start
- Unplug the recliner from the wall power socket.
- Remove any battery backup pack if your recliner has one fitted.
- Clear the area around the recliner so you have space to safely work.
- Take a before photo of the actuator, plugs and cable routing.
- Compare the replacement actuator with your original actuator before installation.
- Check the fixing points, install length, stroke, 2 pin OI power plug and 5 pin DIN handset or switch connection.
Use Safe Lifting and Handling
Recliners, sofas and powered lounges can be heavy and awkward to move. Use safe lifting techniques and ask another person to help if needed. Bend your knees, keep your back straight, avoid twisting while lifting, and do not attempt to lift or turn over furniture that feels too heavy to control safely.
When tilting or turning the recliner to access the actuator, make sure the furniture is stable before placing your hands underneath. Never place your fingers near moving scissor mechanisms, brackets or pinch points.
Step By Step Installation Guide
- Disconnect the power. Make sure the recliner is unplugged from the wall and there is no power connected to the actuator.
- Access the actuator. Carefully tilt the recliner or sofa to access the underside of the frame. Use safe lifting techniques and get help from another person if required.
- Take a before photo. Photograph the original actuator position, plug connections, cable routing and mounting direction before removing the old actuator.
- Disconnect the plugs. Unplug the 2 pin OI power lead and the 5 pin DIN handset or switch plug from the old actuator.
- Remove the old actuator. Remove the fixing pins, clips, bolts or brackets holding the actuator to the recliner mechanism. Keep any reusable clips or hardware in a safe place.
- Compare the old and new actuators. Check that the fixing points, install length, stroke and plug connections are suitable before fitting the replacement.
- Fit the new actuator. Position the JLDQ.11.156.333A actuator in the same direction as the original actuator and secure it using the original fixing hardware.
- Reconnect the plugs. Connect the male 2 pin OI power lead and the compatible 5 pin DIN handset or switch plug to the actuator.
- Check cable routing. Make sure cables are clear of moving parts, sharp edges, scissor mechanisms and pinch points.
- Test the recliner carefully. Reconnect power and briefly test the recliner movement. Watch the actuator and cables during the first test to make sure everything moves freely.
Final Safety Check
After installation, check that all fixing points are secure, the cables are safely routed and the actuator moves smoothly without obstruction. If the recliner does not operate correctly, disconnect the power before checking the plugs or actuator position.
If you are unsure at any stage, contact Sofa Rehab for help before continuing. We can assist with checking your actuator model, plug connections and replacement part suitability.
Compatible Models
Compatible Models
Compatible Models
The actuator supplied for this listing is the Okin Refined JLDQ.11.156.333A model.
This actuator may be used as a compatible replacement for the following related model numbers, provided the fixing points, operational dimensions, power plug and 5 pin DIN handset or switch connection are suitable:
| Compatible Model Number | Compatibility Notes |
|---|---|
| JLDQ.11.156.333A | Direct replacement when your existing actuator has matching fixing points, operational dimensions and plug connections. |
| JLDQ.1.156.333 | Compatible replacement option. The actuator supplied will be the JLDQ.11.156.333A version. |
| JLDQ.1A | Compatible replacement option. Cable length, cable position or label details may differ from the original actuator. The actuator supplied will be the JLDQ.11.156.333A version. |
| JLDQ-11 | Compatible replacement option where the fixture points, stroke, install length and plug connections are suitable. The actuator supplied will be the JLDQ.11.156.333A version. |
Some original actuators may have slight differences, such as power cable length, cable position or label details. These differences do not necessarily prevent compatibility. The key details to confirm are the 156mm install length, 333mm stroke, matching fixing points, male 2 pin OI power connection and compatible 5 pin DIN handset or switch plug.
Important: This actuator is not suitable as a lift chair actuator. It is intended for compatible standard electric recliner chairs, sofas and powered lounge mechanisms.
If you are unsure whether this actuator is the right replacement, please contact Sofa Rehab before ordering. We can help you compare your existing actuator model number, plug type, fixing points and operating dimensions.
Reviews (0)
Thank you for making an effort to leave a reivew but to protect against spam we only accept reviews from verified owners. Please proceed to login using the same email address you used when ordering the product.
Customer Login
- There are no reviews yet.
FAQs
FAQs
Is the JLDQ.11.156.333A actuator suitable for lift chairs?
No. This actuator is not suitable as a lift chair actuator. It is designed for compatible standard electric recliner chairs, powered sofas and lounge mechanisms.
What measurements do I need to check before ordering?
Please compare your original actuator with this replacement before ordering. The key details to check are the fixing points, 156mm install length, 333mm stroke, approximate 520mm total length between fixing points, 2 pin OI power plug and 5 pin DIN handset or switch connection.
Is the white actuator slider block available separately?
No. The white actuator slider block is not available as a separate spare part for this model. If the slider block has cracked or broken, the complete actuator motor is the correct replacement repair.
Can this actuator replace JLDQ.1A, JLDQ-11 or JLDQ.1.156.333?
Yes. This JLDQ.11.156.333A actuator may be used as a compatible replacement for those related model numbers, provided the fixing points, operational dimensions, power plug and 5 pin DIN handset or switch connection are suitable.
Can I install this recliner actuator myself?
Many customers can replace a recliner actuator themselves with basic tools and careful checking. Always disconnect power first, take a before photo of the original actuator and wiring, use safe lifting techniques, and make sure all cables are kept clear of moving parts and pinch points.
