Okin Recliner Motor JLDQ.10.435.250A

Technical Specifications

Please compare the model number, stroke, install length, plug connections and mounting points against your original actuator before ordering.

How To Install a JLDQ Recliner Actuator

These instructions are a general guide for replacing a compatible Dewert/Okin Refined/Phoenix Mecano JLDQ recliner actuator. Always disconnect the recliner from power before starting and take care when moving or lifting furniture.

1. Disconnect the power.
   Unplug the recliner from the wall socket and disconnect the power supply transformer before working on the chair, sofa or lounge.
2. Move the recliner safely.
   Carefully move the recliner into a suitable working position. Use safe lifting techniques, avoid twisting your back, and get another person to help if the furniture is heavy, awkward or difficult to control.
3. Take a before photo.
   Before removing anything, take clear photos of the actuator, cable routing, plug connections, mounting points and attachment clips. These photos will help you refit the new actuator the same way.
4. Locate the existing actuator.
   Find the recliner actuator motor underneath the furniture. It is usually attached to the recliner mechanism at both ends with mounting pins, clips or clevis style attachments.
5. Check the replacement actuator matches.
   Compare the old actuator with the new replacement before removing the original part. Confirm the model, stroke length, install length, plug connections, cable layout, mounting points and attachment ends are the same or compatible.
6. Disconnect the plugs and cables.
   Carefully unplug the actuator cables from the matching connections. Do not pull on the wires themselves. Hold the plug body where possible and gently release any retaining clips.
7. Remove the mounting clips or pins.
   Support the actuator while removing the clips, pins or fasteners holding it to the recliner mechanism. Keep the original pins and clips safe if they are being reused.
8. Remove the old actuator.
   Once both ends are disconnected, carefully remove the old actuator from the recliner mechanism. Avoid forcing the mechanism or allowing the actuator to drop suddenly.
9. Fit the new actuator into position.
   Position the new JLDQ replacement actuator in the same orientation as the original. Refit the mounting pins, clips or fasteners securely at both attachment points.
10. Reconnect the cables and plugs.
    Route the cables the same way as the original actuator, using your before photo as a reference. Reconnect the plugs firmly and make sure the cables are not pinched, stretched, twisted or positioned near moving mechanism parts.
11. Test the recliner before final positioning.
    Reconnect the power supply and carefully test the recliner movement. Check that the actuator moves smoothly, the mechanism opens and closes correctly, and no cables are being pulled or trapped.
12. Return the furniture to normal use.
    Once you are satisfied the actuator is working correctly, carefully return the chair, sofa or lounge to its normal position. Continue to use safe lifting techniques and get help if needed.

If the recliner still does not operate after installation, check the power supply, handset or switch, cable connections and any loose or damaged plugs. If you are unsure, contact us with photos of your actuator, plugs and wiring layout for help.

Compatible Models

This Dewert/Okin Refined/Phoenix Mecano JLDQ.10.435.250A recliner actuator is suitable as a replacement for selected compatible JLDQ actuator models with the same key specifications.

Before ordering, please compare your original actuator against this replacement to confirm it is the same or similar compatible item. The model number alone is helpful, but you should also check that the cables, plugs, plug size, mounting points, clevis ends and attachment points match your existing actuator.

Also confirm the stroke length, install length and voltage rating match your original part. This actuator has a 250mm stroke, 435mm install length and 24V 50W rated voltage.

If your old actuator has one of the compatible model numbers listed above but the cables, plugs or attachment points look different, please contact us with photos before purchasing so we can help confirm whether this is the correct replacement.