TiMotion TP2P-1015-001 Transformer
$145.00
In stock
Genuine TiMotion TP2P-1015-001 power supply transformer for compatible electric recliner and lift chair systems. Spec code TP2P-A1A1, model TP2P, with 100V-240V input and 29V 2.0A 58W output. Accepts a figure 8 C8 wall lead and has a 130mm low-voltage lead with female 2 pin OI plug and retaining clasp. TiMotion Recliner Power Supply with Battery Backup. Commonly found on Chisholm House 4 button recliners sold through Harvey Norman. May suit other chairs if the part number, specs and plugs match. Power Supply Brick Only, Cable Add-Ons Available. Supplied as the transformer brick only unless add-ons are selected. Wall power leads and 2 pin OI extension leads are available near the add to cart button. Need a Different Recliner Power Supply? Browse our power supply transformers (click here) catalogue for other models, plug types and recliner power adapter options. read more
In stock
- Description
- Technical Specifiations
- How To Tutorial
- Reviews (0)
- FAQs
- Add a review
Description
TiMotion TP2P-1015-001 Recliner Lift Chair Power Supply
The TiMotion TP2P-1015-001 is a replacement AC/DC power supply transformer for compatible electric recliners and lift chair systems. This unit is model TP2P with spec code TP2P-A1A1, rated for 100V-240V input and 29.0V 2.0A 58.0W output.
This transformer accepts a figure 8 C8 wall power lead on the mains side and has a 130mm low-voltage output lead with a female 2 pin OI plug and retaining clasp on the recliner side. The green LED indicator shows when the transformer is receiving power.
This is a specific TiMotion replacement power supply, so we recommend checking the label on your original transformer before ordering. Match the part number, spec code, output rating and plug style to make sure this is the correct replacement for your chair.
This transformer supports a mains power range of 100v-240v and 50/60Hz making it suitable for use in any country.
Check Your Original Part Number, Spec Code and Plug Type
Before ordering, compare your old power supply transformer with the details of this unit. The important matching details are:
Part number: TP2P-1015-001
Spec code: TP2P-A1A1
Model: TP2P
Output: 29.0V 2.0A 58.0W
Wall-side input: figure 8 C8 socket
Chair-side output: female 2 pin OI plug with retaining clasp
Low-voltage lead length: 130mm including plug
Transformer box size: 141mm long x 86mm wide x 38mm deep
This transformer is commonly found on Chisholm House 4 button recliners sold through Harvey Norman. It may also suit other recliner and lift chair systems where the original transformer uses the same TiMotion part number, spec code, electrical rating and plug configuration.
If your original transformer has a different part number, different output rating, different plug shape or a different battery backup arrangement, contact us before ordering and we can help you check which replacement power supply you need.
Supplied as the Power Supply Brick Only
This product is supplied as the TiMotion TP2P-1015-001 power supply brick only unless extra cable options are selected before checkout. This lets you replace only the faulty transformer rather than paying for a full cable set if your existing leads are still safe, undamaged and fitting firmly.
If your current figure 8 wall power lead and 2 pin OI extension lead are still in good working condition, you can order the transformer brick by itself and reuse your existing cables.
Need a complete replacement setup? Use the add-on options near the add to cart button before checkout. Depending on your repair, you can choose:
A wall power cable if your original mains lead is missing, damaged, frayed or unsafe
A 2 pin OI extension lead if the low-voltage cable from the transformer to the recliner is damaged, crushed, loose, too short or missing
Only reuse your original cables if they are safe, undamaged and fit securely. If a cable is loose, intermittent, crushed or visibly damaged, it should be replaced at the same time as the transformer.
Emergency Battery Backup for Chair Closure
This TiMotion TP2P transformer includes battery storage for 2x 9V LR61 batteries. The batteries are not supplied with the transformer.
The battery backup is designed for emergency chair closure during a power failure. It is not a cordless recliner battery pack and is not intended to keep operating the chair normally without wall power. The batteries provide enough power for one emergency close cycle only.
After the emergency closure feature has been used, the 9V batteries should be replaced. If the backup feature has not been used, we still recommend replacing the batteries every 12 months so they are fresh and ready if needed.
Do It Yourself and Save Time & Money
Replacing a recliner power supply transformer is a simple DIY repair when the correct replacement part is selected. There is no wiring or electrical modification required. The cables connect with push-together plugs, so you can usually swap the transformer over in just a few minutes.
Before unplugging your old transformer, take a quick photo of how the cables are connected. Then disconnect the old power supply, connect the replacement transformer, check that the plugs are firmly seated, and test the chair operation.
You Can Do It yourself and save the cost of a call-out repair. If you are unsure whether this is the correct transformer for your chair, send us a photo of your original power supply label and plug ends so we can help you identify the right replacement.
Technical Specifiations
Technical Specifiations
Technical Specifications
| Brand | TiMotion |
|---|---|
| Product Type | AC/DC power supply transformer for electric recliner and lift chair systems |
| Part Number | TP2P-1015-001 |
| Model | TP2P |
| Spec Code | TP2P-A1A1 |
| Input | 100V-240V, 50/60Hz, 1.5A |
| Output | 29.0V DC, 2.0A, 58.0W |
| Duty Cycle | 2 min ON max / 18 min OFF min |
| Use | Indoor use only |
| Wall Side Connection | Accepts figure 8 C8 power lead |
| Chair Side Connection | Female 2 pin OI low voltage plug with retaining clasp |
| Low Voltage Lead Length | 130mm including plug |
| Power Indicator | Green LED power on indicator |
| Battery Backup Storage | Accepts 2x 9V LR61 batteries |
| Batteries Included | No, batteries are not supplied |
| Battery Backup Purpose | Emergency chair closure during a power failure only |
| Battery Backup Runtime | Designed to provide enough power for one close cycle only |
| Battery Replacement Guide | Replace after emergency use or every 12 months, whichever comes first |
| Transformer Box Dimensions | 141mm long x 86mm wide x 38mm deep |
| Supplied As | Power supply brick only unless cable add-ons are selected before checkout |
| Optional Add-Ons | Figure 8 wall power lead and 2 pin OI extension lead available near the add to cart button |
How To Tutorial
How To Tutorial
How To Replace Your TiMotion TP2P Recliner Power Supply Transformer
Replacing this TiMotion TP2P-1015-001 power supply transformer is a simple plug-in repair when the correct replacement part has been selected. No electrical wiring or special tools are required. The transformer connects using push-together plugs, so most customers can complete the replacement themselves in just a few minutes.
Before starting, check that your original transformer label matches the important details for this unit: part number TP2P-1015-001, spec code TP2P-A1A1, 29.0V 2.0A output, figure 8 C8 wall input and a female 2 pin OI low-voltage output plug with retaining clasp.
Before You Start
- Turn the power off at the wall socket.
- Unplug the wall power lead from the mains power outlet.
- Take a clear photo of your current transformer and cable connections before unplugging anything.
- Check the existing wall lead and OI extension lead for damage, crushing, looseness or exposed wiring.
- Do not reuse damaged or unsafe cables. Add replacement leads before checkout if needed.
Step By Step Installation
- Disconnect the figure 8 wall power lead from your old transformer.
- Disconnect the low-voltage 2 pin OI plug from the recliner or extension lead. Release the retaining clasp carefully if fitted.
- Remove the old transformer from behind or underneath the chair.
- Position the new TiMotion TP2P-1015-001 transformer where the original unit was located, making sure the cables are not stretched, pinched or trapped under the mechanism.
- Connect the figure 8 C8 wall power lead into the transformer.
- Connect the female 2 pin OI low-voltage plug to the matching recliner lead or OI extension lead. Make sure the plug is fully seated and the retaining clasp is secure.
- Plug the wall power lead back into the power outlet and turn the power on.
- Check that the green LED power indicator is on.
- Test the recliner using the hand control or buttons, making sure the chair opens and closes smoothly.
Installing The Emergency Backup Batteries
This transformer has battery storage for 2x 9V LR61 batteries. Batteries are not supplied. The batteries are only used for emergency chair closure during a power failure and are not intended to run the recliner as a cordless battery system.
- Make sure the transformer is unplugged from wall power before fitting the batteries.
- Open the battery storage compartment on the transformer.
- Fit 2x 9V LR61 batteries, making sure the battery terminals are connected the correct way around.
- Close the battery compartment securely.
- Reconnect wall power and check that the transformer is operating normally.
The backup batteries are designed to provide enough power for one emergency close cycle only. Replace the batteries after emergency use, or every 12 months, whichever comes first.
Using The Add-On Cable Options
This product is supplied as the power supply brick only unless cable add-ons are selected before checkout. If your original wall lead and OI extension lead are still safe, undamaged and fitting firmly, you can reuse them with the new transformer.
If your cables are missing, damaged, loose, crushed or unsafe, use the add-on options near the add to cart button to include the extra leads you need before checkout.
- Wall power lead: Add this if your figure 8 mains lead is missing, damaged or unsafe.
- 2 pin OI extension lead: Add this if the low-voltage lead from the transformer to the recliner is damaged, loose, too short or missing.
Troubleshooting After Installation
- No green LED light: Check that the wall socket is turned on and the figure 8 power lead is firmly connected.
- Chair does not move: Check that the 2 pin OI plug is fully connected and the retaining clasp is secure.
- Chair works intermittently: Inspect the wall lead and OI extension lead for looseness or damage.
- Backup batteries do not close the chair: Replace the 9V batteries and make sure they are fitted correctly.
If you are unsure whether this is the correct transformer for your recliner, contact us with a photo of your original transformer label and plug ends. We can help you identify the right replacement part before you order.
Reviews (0)
Thank you for making an effort to leave a reivew but to protect against spam we only accept reviews from verified owners. Please proceed to login using the same email address you used when ordering the product.
Customer Login
- There are no reviews yet.
FAQs
FAQs
Is the TiMotion TP2P-1015-001 transformer suitable for my recliner?
The TiMotion TP2P-1015-001 transformer is suitable for compatible electric recliner and lift chair systems using the same part number, spec code and plug configuration. Before ordering, check your original transformer label for part number TP2P-1015-001, spec code TP2P-A1A1, 29.0V 2.0A output and the same female 2 pin OI plug with retaining clasp.
Does this TiMotion TP2P transformer fit Chisholm House recliners?
This transformer is commonly found on Chisholm House 4 button recliners sold through Harvey Norman. It may also suit other electric recliners and lift chairs, but the safest way to confirm compatibility is to match the original transformer label, output rating, figure 8 C8 input and 2 pin OI low-voltage plug.
Does the TiMotion TP2P-1015-001 transformer come with batteries?
No, the 9V batteries are not supplied. This transformer has storage for 2x 9V LR61 batteries, which are used for emergency chair closure during a power failure. The batteries are intended to provide enough power for one close cycle only and should be replaced after emergency use or every 12 months, whichever comes first.
Is this a cordless battery pack for my recliner chair?
No, this is not a cordless recliner battery pack. The battery storage is only for emergency closure if the power goes out. The recliner should still be operated using normal wall power through the figure 8 C8 power lead.
Does this power supply include the wall plug lead and OI extension cable?
This listing is for the TiMotion TP2P-1015-001 power supply brick only, unless cable add-ons are selected before checkout. If your original wall power lead and 2 pin OI extension lead are safe and working, you can reuse them. If they are missing, damaged, loose or unsafe, add the replacement leads near the add to cart button before ordering.
