Limoss HC110+3 Controller 6‑Button
$99.00
In stock
Dual‑motor Limoss HC110+3 wired handset controller replaces damaged or unresponsive recliner or lift‑chair remotes that use the 5‑pin round DIN plug. Six clearly embossed buttons drive backrest, footrest and lift functions, while the coiled lead reaches comfortably to your armrest pocket. Genuine part number 500218 delivers plug‑and‑play compatibility with Limoss MC control boxes, restoring factory feel and reliability in minutes—no pairing, tools or programming required. 6‑Button Dual‑Motor Replacement Remote. Compatible with a wide range of dual‑motor lift chairs and power recliners that run a Limoss MC‑series control box and 5‑pin DIN wiring. Just match HC110+3, 500218, or superseded codes 500216 / 500223 on your old handset for a plug‑and‑play swap. Need another plug type or button layout? We stock a huge range of 2‑, 4‑, 6‑ and 8‑button handsets plus USB and back‑lit models. Browse our electric recliner remotes (click here) or contact us for help picking the right replacement. read more
In stock
Description
6 Button Limoss HC110+3 Handset – 5‑Pin DIN Replacement Remote
Restore effortless control to your dual‑motor lift chair or power recliner with this genuine Limoss HC110+3 handset (P/N 500218). Designed in Germany by Limoss, it runs on a safe low‑voltage input of 18–35 V DC (max 2A) and features six clearly embossed buttons for independent back‑rest, foot‑rest and lift/home operation. The soft‑touch ABS body and coiled lead slip neatly into the arm‑pocket holster, and—because it’s built for plug‑and‑play use with any Limoss MC‑series control box—you’ll swap it in within minutes, no pairing, syncing or special tools required.
Any chair using Limoss MC120, MC140 or MC200 control boxes
Check the rear label of your old handset — if it reads HC110+3 or 500218 (and even the earlier supersessions 500216 or 500223) this six‑button remote is a straight swap. It plugs into any Limoss 5‑pin hand‑control box socket and is factory‑matched to the whole MC‑series of control boxes, including: MC110, MC115, MC120, MC125, MC140, MC150, MC210 and MC220.
Need Help Identifying Your Replacement Part?
Our repair specialists are just a call, email or live chat away. Send us a photo of your existing plug or the part label and we’ll confirm compatibility before you buy. If this isn’t the right handset we’ll point you to the correct model—no guesswork, no wasted postage.
'You Can Do It' – Quick DIY Swap in Under 5 Minutes
Power the chair off, unplug the old 5‑pin DIN connector, plug the new handset in, power on—job done! Enjoy the satisfaction of a quick fix and the savings of skipping a service call. As always, our step‑by‑step video tutorial and printable guide are there to walk you through the process, so you can feel confident doing it yourself and saving $$$
Technical Specifications
Technical Specifications
Make – Limoss.
Model Type – HC110+3.
Model Number – 500218.
Cable Length – Approximately 1860mm and is part coiled and part straight.
Plug Type – 90°, 5 pin male din.
How To
How To
Power Off First.
Switch the chair off at the wall and unplug the transformer – safety first.
Find the Right‑Angle (90°) DIN Plug.
Trace the handset’s coiled lead to the control box under the chair; you’ll see the 5‑pin plug sitting at a neat right‑angle.
Unplug & Remove the Old Handset.
Press the retaining clip, pull the plug straight out, then slide the cable and handset clear of the arm pocket.
Plug In the New Handset.
Align the notch, push the new 90° DIN plug firmly home until it clicks.
Restore Power.
Reconnect the transformer and flick the wall switch back on.
Test Every Function.
Run each of the six buttons through a full cycle – back, foot and lift – to confirm smooth operation.
Job Done – Happy Reclining!
Stow the handset in the arm pocket, sit back, and enjoy that factory‑fresh control. DIY savings and satisfaction in one quick fix!
Compatible Models
Compatible Models
HC110+3 500216 / 500223 (same wiring Limoss simply revises the Suffix).
Reviews (0)
Thank you for making an effort to leave a reivew but to protect against spam we only accept reviews from verified owners. Please proceed to login using the same email address you used when ordering the product.
Customer Login
- There are no reviews yet.
FAQs
FAQs
Will this fit my Lift chair?
Yes, If the lift chair has 2 x actuator/motor and the same plug type it will fit. This is a universal remote.
How long can this handset reach?
The overall length of the cable is approximately 1860 mm long.
Do I need an extension lead as well?
No.
My remote has different name/numbers will it still work?
Check the plug, if the plug has the same shape and same pin configuration and the furniture is a dual actuator then it will work.
I have a normal electric recliner chair will this fit?
Yes, this remote can be used instead of the switches on the arm, its suitable for recliner chairs, sofas and lift chairs.
Who makes this remote controller?
This is made by Limoss who are a reputable manufacturer of recliner electronics.
My handset has less than 6 buttons, will this remote work?
No, this remote is for 6 button remote versions only.
