- Description
- Technical Specifications
- How to
- Reviews (0)
- FAQs
- Add a review
Description
4 Button Oval Power Recliner Switch Replacements
A replacement Okin refined 4 button black oval electric recliner switch commonly fitted to the outer arm of power recliner chairs and sofas. This sleek and robust design toggle switch allows for an aesthetically pleasing and discreet appearance. The four large easy to press buttons operate the recliner footrest and backrest/headrest/lumber motor to move the power recliner chair and sofa mechanisms.
Okin 4 Button Toggle Switch for Electric Recliners & Sofas
Model number is 1.65-032.30. This power recliner 4 button toggle switch is compatible with many different brands of electric recliner chairs like as La Z Boy and Kaidi recliner switches.
We're Australia's Leading Supplier of Recliner Chair Spare Parts
We’re Australia’s leading supplier for repair kits and spare parts. Get the lowest prices on DIY repairs and if your a trades person who needs to buy in bulk , we also offer bulk discounts.
Save Time & Money and Do It Yourself
Easy fitting in under 15 minutes with no experience required. The only tool required is a screwdriver.
Technical Specifications
Technical Specifications
Make – Okin Refined.
Model – 1.65.032.30 (Any numbers and letters after this are batch and date numbers these can be different)
Function – Front buttons up and down and rear buttons up and down.
Colour – Black.
Material –Plastic.
Plug – 90° 5 pin din plug.
Dimensions –Length 92 mm, Width 76 mm and thickness is 37 mm. Cable length including the plug is 1400 mm.
How to
How to
- Unplug all power to the recliner and remove the mains plug from the wall socket.
- Lay down a drop sheet on the floor in front of the recliner chair.
- Remove the two screws.
- Then pull out the switch casing to allow it to hang freely by its cable.
- Carefully turn the recliner over on its front side to gain access to the recliner wiring underneath.
- Locate where the original cabling currently fits and make notes of how it’s routed (recommended to take a photo).
- Cut and remove any cable ties holding the switch in place then unplug it from the actuator motor.
- You should be able to remove fully the broken switch from the recliner.
- Feed the replacement switch through the outside arm plug first until the switch housing is snug into the arm hole.
- Secure any free cabling into the same position as the original using cable ties, be sure to check the cable is not caught up and not too tight or at risk of being trapped during motion.
- Carefully turn the recliner back over to the standing position.
- Angle the switch rotation first and then work on screwing in the 2 housing screws for the toggle switch.
- Reconnect the power and switch it on.
- Test the replacement toggle switch by operating the recliner to its maximum opening and closed position. When fully open, look inside to see that the cabling is safely out of harms way and is not stretched or pinched.
Reviews (0)
Thank you for making an effort to leave a reivew but to protect against spam we only accept reviews from verified owners. Please proceed to login using the same email address you used when ordering the product.
Customer Login
- There are no reviews yet.
FAQs
FAQs
Will this work my recliner?
This switch is suitable for electric recliners with a dual motors, you will also need to check your actuator accepts a 5 pin round din plug with a V notch.
Will the switch suit left and right sides of the recliner?
Yes, you may need to rotate the switch 180° to ensure the buttons are the correct way round. I.E front button to open and rear button to close etc.
My switch looks the same and has the same plug but the numbers are different?
Okin have made various versions of the switch for different brands, the switch is the same but may have a longer cable etc. If the switch plug is the same it will work.
Is this switch easy to fit ?
Yes, very simple and no experience is required. See our "How to " tab for detailed step by step instructions.